19189 products in Others

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: matte grey    Size: 1.6L

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: ツヤ消しこげ茶    Size: 1/12L

Equipped with professional features. Powerful Motor, 1050 W One-touch lever for cutting adjustment to adjust the cutting depth smoothly. Rear discharge system that discharges the accumulated cutting dust (can be connected to a dust collector). *Note that a duct adapter (Code #333429), sold separately, is needed to connect to a dust collector. Uses a high-steel aluminum base. Adjustable guide piece that can be adjusted to the position of the marker line and the saw blade. Applications: Cutting various types of wood, various decorative plates, thin resin plates, soft new building materials

Size: Blade diameter 165 mm    Style: Aluminum Base    Pattern Name: Can be connected to dust collectors

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: Matte Brown    Size: 1.6 L

Can be painted directly over rust, a rust-preventive paint for iron parts Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance. No need for rust removal or rust-preventive paint, significantly reducing painting labor Uses: For doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products. For galvalume steel siding, corrugated tin, aluminum building materials, and stainless steel products. Note: Rust that comes off in chunks needs to be removed. Thinning Method: If the paint has a high viscosity and is difficult to apply, please dilute it with a paint thinner solution (10% or less).

Color: red    Size: １／１２Ｌ

Asahipen Oil-based Heavy Duty Paint for Iron Parts, 23.7 fl oz (0.7 L), Matte Black, For Iron, Metal, Rust Resistant, Non-Hazardous, Made in Japan

Color: ツヤ消し黒    Size: ０．７Ｌ

Asahipen Oil-based Heavy Duty Paint for Iron Parts, 0.4 gal (1.6 L), Black, For Iron, Metal, Rust Resistant, Non-Hazardous, Made in Japan

Color: black    Size: 2-1.6 L

Asahipen Oil-based Heavy Duty Paint for Iron Parts, 0.4 gal (1.6 L), Milky White, For Iron, Metal, Rust Resistant, Non-Hazardous, Made in Japan

Color: ミルキーホワイト    Size: １．６Ｌ

Can be painted directly over rust, a rust-preventive paint for iron parts Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance. No need for rust removal or rust-preventive paint, significantly reducing painting labor Uses: For doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products. For galvalume steel siding, corrugated tin, aluminum building materials, and stainless steel products. Note: Rust that comes off in chunks needs to be removed. Thinning Method: If the paint has a high viscosity and is difficult to apply, please dilute it with a paint thinner solution (10% or less).

Color: ライトグリーン    Size: １／５Ｌ

Asahipen Oil-based Heavy Duty Paint for Iron Parts, 23.7 fl oz (0.7 L), Ivory, For Iron, Metal, Rust Resistant, Non-Hazardous, Made in Japan

Color: Ivory    Size: ０．７Ｌ

LOCTITE Urethane Foam, Green Foam, 12.6 oz (340 g), Filler for All Gaps for Window Frames, Pipes, and Other Residential Construction Multipurpose urethane foam for indoor and outdoor residential soundproofing, insulating, gap-filling and mouseproofing can be used on wide, flat and irregular surfaces. It reacts to moisture and cures quickly without losing volume after curing, making it easy to sand, cut and paint as needed. It can also be attached to almost any building material, and can be used to fill cavities and cracks in penetrating areas such as walls and ceilings, pipes and ducts. In addition, by sealing gaps between windows, doors, plumbing and electrical appliances, it not only improves insulation but also sound insulation. Product Benefits * Use Anywhere * Can be filled and filled in any gap * Can also be used as an adhesive for insulation boards, pipe insulation. * Can be quickly cured and polished, cut and painted once cured * High moisture and mildew resistance * Round tube included How to use 1. Completely remove dust and oil from the filling area. 2. Be sure to cure the surroundings of the area with a masking tape or sheet. 3. Lightly moisten the area with water using a spray or similar spray. 4. Firmly attach the tube to the can, shake it up and down for about 20 times before use. 5. Turn the can upside down and pull the trigger to discharge the liquid. 6. When installing door frames and window frames, please be sure to use a support rod to prevent the frame from deforming due to the pressure of the foam. 7. After 1-2 hours, cut off unwanted parts with a utility knife, then apply paint or putty on urethane foam if needed.

Size: 297 g (mini) single item

Set of 5 jigsaw blades [Uses] Jigsaw Replacement Blade Features: Set of 5 types of jigsaw blades for woodworking, circular cutting, plywood, new building materials, and ironwork. Jigsaw blades are DRJ11XR, DRJ120L5, ARJ120, ARJK120KT, ASK-1010, ASK-1010KT, BSK-1800L1, BSK-1800KTL1, ASK-1001, BRJ-11XR (old model), BRJ-120 (old model). RJK-120 Compatible with older models, RJK-120KT (old model), ASK-1000 (old model). When installing a jigsaw blade to a reciprocating saw, a dedicated blade holder for jigsaw blades sold separately (product name: 6076995) is required. *DRJ11XR, ARJK120KT, BRJ-11XR, RJK-120KT, BRJ-11XR, and RJK-120KT are included as a standard accessory. [Precautions] Please check the instruction manual and compatible model carefully before use. Do not use for anything other than the specified purpose. Do not work in an overwhelming posture, keep balance. Please wear protective glasses when working, to ensure safety. Before use, please check if there are no damaged parts before use. The listed cutting capacity refers to the capacity of the blade and the actual cutting capacity varies depending on the model installed