361 products in Components

- OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure - 200 TO 1800 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed - MORE EFFICIENT TECHNOLOGY: The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors - EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature - TECHNICAL DATA: Fan speed: 200–1800 rpm (0 rpm

- KEY FEATURE NVIDIA Ampere Streaming Multiprocessors 2nd Generation RT Cores 3rd Generation Tensor Cores Powered by GeForce RTX™ 3090 Integrated with 24GB

- A-Tech RAM Memory compatible for select DDR4 Servers & Workstation systems only; (*WILL NOT WORK with Desktop Computers, Laptop Computers, or PCs of any kind*) - 128GB RAM Kit (8 x 16GB Modules); DDR4 DIMM 288 Pin; Speeds up to 2933MHz PC4-23400 (PC4-2933Y) - ECC Registered RDIMM; 1Rx4 - Single Rank x4; JEDEC DDR4 standard 1.2V - Improves system performance, workload capacity, and reduces bottlenecks by increasing memory (RAM) resources - Note: This memory is ECC Registered and cannot be mixed with different ECC types such as ECC Unbuffered, ECC Load Reduced, or Non-ECC Unbuffered; (Memory compatibility can vary among different system models and their installed components; please verify compatibility and follow memory channel guidelines to ensure maximum performance) - Each A-Tech memory module is built and tested for superior performance and trusted reliability - All A-Tech products are covered with a Limited Lifetime Warranty and are backed by our top rated support team to help guide you every step of the way

Size: 16GB | 1Rx4    Style: DDR4-2933 (PC4-23400)    Color: 8 Module Kit

The NR200P V2 is meticulously crafted to provide extensive support for radiators and liquid cooling systems, unlocking your GPU's full potential like never before. With a design that includes both a tempered glass side panel and a ventilated steel panel, two bottom fan slots, and easily removable and accessible panels and slots, this case is engineered for convenience. Accommodating a substantial 356mm GPU with 3.5 slots and supporting a height of up to 160mm, the NR200P V2 proves that size is no obstacle to delivering raw performance. Featuring large, elegant ventilation patterns, this case ensures your system runs at peak efficiency and top performance.

Style: NR200P V2

- Chipset: AMD RX 7900 XT - Memory: 20GB GDDR6 - XFX MERC Triple Fan Cooling Solution - Boost Clock: Up to 2560 MHz

Style: RX 7900 XT Black

- Fully Modular Micro-Fit PSU Connectors: CORSAIR Type 5 Gen 1 micro-fit PSU cables mean you only connect the cables your system needs while taking up less space. - Zero RPM Fan Mode Support: At low and medium loads the cooling fan switches off entirely for near-silent operation. - 100% 105°C-Rated Japanese Electrolytic Capacitors: Premium internal components deliver unwavering power delivery and long-term reliability. - Modern Standby Compatible: Extremely fast wake-from-sleep times and better low-load efficiency.

- This M.2 NGFF/NVME Length Extend Adapter is used for extending the length of your M.2 SSD (Solid State Drive). It is commonly used in custom PC builds or upgrading existing systems where there is a need to position the SSD in a different location within the computer case. - Model: M.2 NGFF/NVME; Support: 2230 to 2242/2260/2280, 2242 to 2280, 2260 to 2280; Total Size: 50 x 22 x 0.7mm/1.97 x 0.87 x 0.03-inch (L*W*T); In the package of: 2 x SSD Extension Bracket, 2 x Screws - With this adapter, you have the flexibility to position your M.2 NGFF/NVME SSD in a more convenient location within your computer case. This can help with cable management and optimize airflow for better cooling. Detachable design, can be easily broken off without using other tools. - Steps of installation: 1. Use a screwdriver to unscrew the screws on the back; 2. Align the end of the hard drive with the screw hole of the extension bracket; 3. Re-tighten the screws and clamp them together. - Please note that this product does not support 2242 to 2260. You need to cut it off to adjust the length according to your requirements.

- Low Noise Fan - DC-DC Circuit Design - Active PFC design - Industrial level protection with OVP,OCP,OPP,OTP, SCP

- Signature ModFlex™ Sleeving - High-grade Copper Wiring - Rich and Vibrant Color - Extends 24-pin ATX Cables - 100% Heatshrink-free

Style: ATX 24-pin    Color: White

- Heavy duty cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 3000 RPM, max. 41.3 dB(A), >150,000 h MTTF - Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency - 12V 3000rpm model (41.3dB) with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 800-3000rpm speed range - High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection - Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection

- A-Tech RAM Memory compatible for select DDR4 Servers & Workstation systems only; (*WILL NOT WORK with Desktop Computers, Laptop Computers, or PCs of any kind*) - Single 8GB RAM Module; DDR4 DIMM 288 Pin; Speeds up to 3200MHz PC4-25600 (PC4-3200AA) - ECC Registered RDIMM; 1Rx8 - Single Rank x8; JEDEC DDR4 standard 1.2V - Improves system performance, workload capacity, and reduces bottlenecks by increasing memory (RAM) resources - Note: This memory is ECC Registered and cannot be mixed with different ECC types such as ECC Unbuffered, ECC Load Reduced, or Non-ECC Unbuffered; (Memory compatibility can vary among different system models and their installed components; please verify compatibility and follow memory channel guidelines to ensure maximum performance) - Each A-Tech memory module is built and tested for superior performance and trusted reliability - All A-Tech products are covered with a Limited Lifetime Warranty and are backed by our top rated support team to help guide you every step of the way

Size: 8GB | 1Rx8    Style: 3200MHz (PC4-25600)    Color: Single Module

- A-Tech RAM Memory compatible for select DDR4 Servers & Workstation systems only; (*WILL NOT WORK with Desktop Computers, Laptop Computers, or PCs of any kind*) - 32GB RAM Kit (2 x 16GB Modules); DDR4 DIMM 288 Pin; Speeds up to 3200MHz PC4-25600 (PC4-3200AA) - ECC Registered RDIMM; 1Rx4 - Single Rank x4; JEDEC DDR4 standard 1.2V - Improves system performance, workload capacity, and reduces bottlenecks by increasing memory (RAM) resources - Note: This memory is ECC Registered and cannot be mixed with different ECC types such as ECC Unbuffered, ECC Load Reduced, or Non-ECC Unbuffered; (Memory compatibility can vary among different system models and their installed components; please verify compatibility and follow memory channel guidelines to ensure maximum performance) - Each A-Tech memory module is built and tested for superior performance and trusted reliability - All A-Tech products are covered with a Limited Lifetime Warranty and are backed by our top rated support team to help guide you every step of the way

Size: 16GB | 1Rx4    Style: 3200MHz (PC4-25600)    Color: Kit of 2