464 products in DIY

- Tungsten carbide-tipped cutting edges last longer and can be run at higher rates and speeds, cutting diameter is 17mm(0.66"), effective depth is 25mm(1”). - Well made of high speed steel, with extremely sharp blade, low consumption and durable, provided impact resistance, wear resistance. - Edge coated with diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut without broken. - Integrated design including drill bit, spring, hex wrench. Split point pilot drill bit prevents the bit from walking. - Fast and precise cutting for stainless steel, sheet metal, fiberglass and wood.

- 20/60V 9A.H MAX FLEX BATTERY

Style: 1 Pack

- VERSATILE 11-IN-1 TOOL: Includes 7 tips and converts to 4 nut driver sizes for a wide range of applications - INTERCHANGEABLE COMPONENTS: Fast and easy switch outs with interchangeable bits and nut drivers - COMFORTABLE CUSHION-GRIP HANDLE: Provides a comfortable grip for enhanced control and torque - INCLUDED BITS: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess - BLAST FINISH BIT: Tips provide a firm hold and reduce cam-out - REPLACEMENT BITS: Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)

- ⚙️【Solid and Sturdy】 The black hole saws are much solider and sturdier than the red one, they are premium hole cutters for installing recessed lights into ceiling, for punching a big hole at wall to fit a vent pipe or an extract fan, also for cable installation and soft metal cutting. - ⚙️【Sharp and Durable】 The cutting teeth is double layered with high speed steel, obviously thicker and heavier than the red hole saw. Strong and solid body, sharp and durable teeth, easy to punch a clean hole. - ⚙️【Accurate Cutting】 The increased hardness(70-80HRC) of the M42 bi-Metal and the optimized tooth geometry allow our hole saws to provide faster and more accurate cutting diameter than standard hole saws, the errors of the cut size are less than one millimeter. - ⚙️【Chips Remove】 The embed slug holes around the saw body are designed for removing the wood and metal chips while cutting. They are also good for reducing friction heat and improve the efficiency, due to the fact that less of total amount of material is actually cut. - ⚙️【60 Days Refundable】If you had any problem with the paket you have received, for example, miss parts, or just not satisfied with our products, please contact us via e-mail, all our products are refundable for 60 days.

Color: Frosted Black   

- ⚙️【HOLE CUTTER】The HSS hole saws are perfect cutting tools for installing recessed lights into ceiling, for punching a big hole at wall to fit a vent pipe or an extract fan, and also for cable installation. - ⚙️【SHARP TEETH】The bi-metallic cutting teeth is layered with high speed steel, that increases their hardness and durability, and gives the hole saw excellent cutting ability to punch a clean hole. - ⚙️【ACCURATE CUTTING】 The increased hardness of the carbide technology and optimized tooth geometry allow our hole saws to provide faster and accurate cutting than standard hole saws, the diameter errors of the cut holes are less than a millimeter. - ⚙️【MORE EFFICIENCY】 Each hole saw is designed with slug holes, which can remove the wood chips while cutting, reduce friction heat and improve the efficiency. Due to the fact that less of total amount of material is actually cut, much less power is required, longer battery life of power tools is benefited. - ⚙️【60 DAYS REFUNDABLE】If you are not satisfied with the hole saws, or have probelms with missing parts of the package you’ve received, please contact us via e-mail, we will reply you in 6 hours, and we promise that all our products are refundable for 60 days.

Color: Red   

- Constructed from Chrome-Vanadium Steel, with mirror chrome finish further. - Set Includes: 1/4" Dr.: 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm - The flexible design with a 40-degree working angle that allows you to use 360-degree rotation to reach tough spots. - High contrast and specific size marking for identification. It helps you select the size easier. - It comes with a sturdy and convenient storage case. Keep each piece in the proper position. All EMENTOL products meet or exceed ANSI performance standards.

Style: Metric

- Top quality magnetic screwdriver set, 10 professional grade screwdrivers that are designed to serve a multitude of uses. - Premium materials, the screwdriver bar is made of chromium vanadium steel for durable. Black finish blade with magnetic tips which could conveniently attracts screws. - Cushion grip handle for comfort and control,With ergonomic TPR handle, it helps you to use very easily. - Including 2 kinds of portable key screwdriver(flathead screwdriver and phillips screwdriver). - Convenient storage, Each set of screwdrivers is equipped with a transparent storage bucket to prevent loss.

Pattern Name: 10-Piece Screwdrivers Set (Yellow)

- INCLUDES: (1) 2-1/2" x 20' long left spiral clear flexible hose (2) 2-1/2” Double Loop Quick Release Hose Clamps - QUALITY: Hose made from high quality PVC for durability, strength and easy installation; Clamps made from steel with coating for durability - APPLICATIONS: Ideal for an assortment of sawdust collectors, air conditioning indoor ventilation ducts and 2-1/2” PVC dust collection systems for woodworking applications - FUNCTION: A quick release clamping tool for establishing a firm, secure connection from your dust collection hoses to fittings, dust hoods, blast gates, dust ports, and other components - SPECIFICATIONS: The 2½” clamp opens up to approx. 3” ID when fully opened (with handles squeezed together)

- Includes (1) 4" diameter 20 feet long left spiral clear flexible hose (1) 4” to 2 1/2” Dust Collection Hose Reducer - FUNCTION: A handy double sided adapter that allows you to step down from your larger (4”) dust collection hose to a smaller (2-1/2) shop vacuum hose branch line. The 2-1/2 in. opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners - PLEASE NOTE: This cone reducer is specifically designed to work exclusively with 4” and 2-1/2” hoses | It is NOT intended to fit or accommodate a 2-1/2” OD or 4” OD dust collection equipment port directly (which would require POWERTEC 70149 or 70148 Flex Cuffs) - PREMIUM: Made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection - DIMENSIONS: 4” nominal OD end measures 3-61/64” OD and 3-41/64” ID; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID - Made from high quality PVC for durability, strength and easy installation - Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability - Perfect for any clear view dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration - Ideal for an assortment of sawdust collectors, air conditioning indoor ventilation ducts and 4” PVC dust collection systems for woodworking applications

- INCLUDES: (1) 4 inch x 20 ft. left spiral transparent dust collector hose and (2) thumb screw 4 inch key hose clamps - FUNCTION: Practical, safe and cost-effective dust collection hose and clamp - designed to enhance your existing workshop dust collection and filtration system - FLEXIBLE: PVC HOSE is reinforced with spring steel wire, puncture resistant, while delivering optimal maneuverability and toughness - HOSE CLAMPS: Made of stainless steel for rust resistance and features a thumb screw design that allows you to quickly loosen or tighten clamps around flexible hoses (or items) without using tools - VERSATALITIY: Works with a wide variety of major brand dust collection systems, indoor ventilation and dryer ventilation arrangements, along with many common piping, ductwork and woodworking applications

No description available.

No description available.

Size: 3/8 inch    Color: White