17340 products in Others

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: ツヤ消し白    Size: 1/12L

- Contents: 23.7 fl oz (0.7 L), Color: Brown - Drying time: 1.5 - 2 hours in summer, 5 - 6 hours in winter, Standard coating area (1 coat): 64.6 - 86.1 sqft (6 - 8 sqm or 3.6 - 4.5 tatami mats) - Fire Service Act: Non-hazardous material (designated combustible); Contains flammable and combustible petroleum products - Do not use near open flame, EVA enamel paint (A-052); Ingredients: EVA, pigment, rust inhibitor, organic solvent - GHS Indication: Hazardous, flammable, skin irritant, risk of allergic skin reactions, risk of damage to organs and stimulation of the respiratory system, risk of drowsiness and dizziness, and highly toxic to aquatic organisms

Color: Braun    Size: 0.7L

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: こげ茶    Size: １／１２Ｌ

Gloss: Glossy/Matte Preparation method: For iron part repairs, use Asahipen \"Iron Part Repair Material\", and for leak-related repairs from iron parts, use Asahipen \"One Touch Iron Part Leak Prevention Repair Material\". Note: Rust that can be easily scraped off needs to be removed.

Color: green    Size: １／５Ｌ

- With the incorporation of a special rust inhibitor, it can be applied directly over rust without removing it - Strong adhesion, can be applied to Galvalume steel sheets, aluminum, stainless steel, etc - Utilizes silicone acrylic resin for excellent weather resistance - No need for rust remover or rust-stopping paint, significantly reducing the time required for painting - Applications: (Indoor/Outdoor classification: For both indoor and outdoor use) Doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products, galvalume steel plate sidings, zinc-coated steel, aluminum building materials, stainless steel products - (Standard) Number of coats: 1 coat - Specifications: Coating Area: 0.2 Gallons (0.7 L) / 65.8 - 86.1 sq ft (6 - 8 sq m or 3.6 - 4.5 tatami mats) - Drying time: Summer: 1.5 - 2 hours, Winter: 5 - 6 hours

Color: 黄   

- Contents: 101.4 fl oz (3 L), Color: Ivory - Drying time: 1.5 - 2 hours in summer, 5 - 6 hours in winter, Standard coating area (1 coat): 269.1 - 387.5 sqft (25 - 36 sqm or 15 - 21 tatami mats) - Fire Service Act: Non-hazardous material (designated combustible); Contains flammable and combustible petroleum products - Do not use near open flame, EVA enamel paint (A-052); Ingredients: EVA, pigment, rust inhibitor, organic solvent - GHS Indication: Hazardous, flammable, skin irritant, risk of allergic skin reactions, risk of damage to organs and stimulation of the respiratory system, risk of drowsiness and dizziness, and highly toxic to aquatic organisms

Color: Ivory    Size: 3リットル

Somay-Q Series achieves a finish that looks dyed by adhering nano-sized particles to the surface of the material! This strong adhesion means that even when pulled or twisted, it won't crack or peel, allowing you to change the look without altering the texture of the material.Perfect for changing the color of leather goods or restoring faded items. It dries quickly and is easy to work with, making it suitable for a wide range of materials and applications. Features: The finish resembles the appearance achieved through dyeing on leather, cloth, wood, plastic, and even metal.Simply spray for a beautiful finish.By using nanotechnology to create a dye-like paint, nano-sized particles permeate and firmly adhere to the inner structure of the material.Please ensure proper ventilation when using, and use protective gear to avoid inhaling mist, gas, or similar substances. Applicable Materials: Please refer to the Somay-Q’s material compatibility chart (English language not guaranteed). Brief Description: Achieves a dye-like finish by simply spraying on metal, leather, fabric, wood, and plastic. Utilizes nanotechnology to create a dye-like paint where nano-sized particles penetrate and adhere to the interior of the material. Ideal for changing the color of leather goods or restoring faded items. Dries quickly and is easy to work with, suitable for a wide range of materials and applications. Note: You cannot use it on some materials, such as reptile leather, enamel, silicone and polyethylene (PE).For more details, please refer to the material compatibility table (English language not guaranteed).-Cannot be used on materials weak to solvents, materials from which oil cannot be completely removed, or materials with water-repellent or other coatings on the surface.Before use, test on an inconspicuous area to ensure there are no unusual effects on the material or issues with adhesion.Applying thick coats on highly-absorbent fabrics or materials with long fibers like suede may result in a rough texture.When spraying bright colors on dark-colored materials, please make sure to use the Somay-Q Base Coat as a primer.Even with the Somay-Q Base Coat, it can be difficult for colors to appear as desired on highly-absorbent materials such as fabric.Test on an inconspicuous area before use.Avoid use when the temperature is below 41°F (5°C) as poor drying may occur.Avoid use when humidity is above 70% to prevent whitening phenomenon (surface film turning white and cloudy).Use in a windless outdoor area and take sufficient precautions to prevent the paint from soiling the surroundings.Ensure good ventilation during painting and drying, and wear masks and gloves to avoid inhaling paint mist or skin contact.

Color: クリヤー    Pattern Name: 単品

Somay-Q Series achieves a finish that looks dyed by adhering nano-sized particles to the surface of the material! This strong adhesion means that even when pulled or twisted, it won't crack or peel, allowing you to change the look without altering the texture of the material.Perfect for changing the color of leather goods or restoring faded items. It dries quickly and is easy to work with, making it suitable for a wide range of materials and applications. Features: The finish resembles the appearance achieved through dyeing on leather, cloth, wood, plastic, and even metal.Simply spray for a beautiful finish.By using nanotechnology to create a dye-like paint, nano-sized particles permeate and firmly adhere to the inner structure of the material.Please ensure proper ventilation when using, and use protective gear to avoid inhaling mist, gas, or similar substances. Applicable Materials: Please refer to the Somay-Q’s material compatibility chart (English language not guaranteed). Brief Description: Achieves a dye-like finish by simply spraying on metal, leather, fabric, wood, and plastic. Utilizes nanotechnology to create a dye-like paint where nano-sized particles penetrate and adhere to the interior of the material. Ideal for changing the color of leather goods or restoring faded items. Dries quickly and is easy to work with, suitable for a wide range of materials and applications. Note: You cannot use it on some materials, such as reptile leather, enamel, silicone and polyethylene (PE).For more details, please refer to the material compatibility table (English language not guaranteed).-Cannot be used on materials weak to solvents, materials from which oil cannot be completely removed, or materials with water-repellent or other coatings on the surface.Before use, test on an inconspicuous area to ensure there are no unusual effects on the material or issues with adhesion.Applying thick coats on highly-absorbent fabrics or materials with long fibers like suede may result in a rough texture.When spraying bright colors on dark-colored materials, please make sure to use the Somay-Q Base Coat as a primer.Even with the Somay-Q Base Coat, it can be difficult for colors to appear as desired on highly-absorbent materials such as fabric.Test on an inconspicuous area before use.Avoid use when the temperature is below 41°F (5°C) as poor drying may occur.Avoid use when humidity is above 70% to prevent whitening phenomenon (surface film turning white and cloudy).Use in a windless outdoor area and take sufficient precautions to prevent the paint from soiling the surroundings.Ensure good ventilation during painting and drying, and wear masks and gloves to avoid inhaling paint mist or skin contact.

Color: espresso brown    Pattern Name: Single Item

- The Amazon points given for this item are granted to be combined and given to each individual item. Please check your order confirmation screen for the exact number of points - Product (left): Easy to spray with a wide variety of colors - Product (left): The nano-unit particles adhere to the surface of the material, giving it the appearance of being dyed - Product (left): An aerosol type that can be easily sprayed with quick drying and excellent workability - Product (left): For changing the color of leather products and repairing old and faded items - Product (Right): Volume: 14.2 fl oz (420 ml) - Item (Right): Color: Clear - Product (Right): Ingredients: Toluene, Xylene

Can be painted directly over rust, a rust-preventive spray paint for iron partsUses silicone acrylic resin for excellent weather resistance.Has strong adhesion and can be painted on galvalume steel plates, tinplate, aluminum, and stainless steel.Finishes in one coat, making it exceptionally workable.

Color: black    Size: 300ml

- [Dye Q Series] The nano-unit particles adhere to the surface of the material, making it look as if it is dyed Its strong adhesion ensures that it does not crack or peel even when pulled or twisted, allowing you to change the image without altering the texture of the material Can change the color of leather products, or repair faded items... Quick-drying and easy to work with, it can be used for a wide range of materials and purposes - Features: Achieves a finish that looks like it has dyed leather, fabric, wood, plastic, and metal Easy to clean with just spray A dyeing-type paint utilizing nanotechnology, with nano-sized particles penetrating and adhering to the interior of the material When using, ensure good ventilation and use protective equipment to avoid inhaling mist or gas - Applicable materials: Please see the material adaptation chart for Somé Q - 【Simple Description】 Features a dye-like finish with just a spray on metal, leather, fabric, wood, and plastic A dyeing-type paint utilizing nanotechnology, with nano-sized particles penetrating and adhering to the interior of the material Can also be used to change the color of leather and repair faded items Fast drying for good workability, usable on a wide range of materials and applications - 【注意事項】 ・Shake well up and down for about 1 minute before use, and occasionally shake well during use Please do not apply thick coatings When using, test paint on an inconspicuous area to ensure there are no adverse effects or adhesion issues with the material ・Do not use below 5°C or when humidity is 70% or higher Spray thickly at once, and ensure not to keep more than 15 cm away from the painted surface Not suitable for materials that are weak to solvents When handling, please read the precautions and instructions on the product label carefully before use

Color: Braun    Pattern Name: Single Item

Dyed paint using state of the art nanotechnology to penetrate and adhere to the interior of the material Pulling or twisting will not peel or crack once applied In addition, since it is a super fine particulate paint, it will not change the texture of the paint and the areas that are not painted, and You can change the color of your items and make any old one look like new. When using, please use protective equipment to ensure good ventilation and do not ingest mist or gas.

Color: splash green    Pattern Name: Single Item