18207 products in Others

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: ブラウン    Size: １／１２Ｌ

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: matte grey    Size: 1/12L

- The sound of your smartphone is reborn Spread high quality sound and deep bass anytime, anywhere - ・Equipped with X Balanced Speaker Unit - ・Equipped with Sony's proprietary algorithm mono mode that spreads sound even when placed vertically - Equipped with Extra Bass mode that produces deep bass - Made of fabric material, dustproof, waterproof (IP67), and rust-proof - Country of Manufacture: China

Color: beige    Style: SRS-XB23    Pattern: Single Item

Can be painted directly over rust, a rust-preventive paint for iron parts Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance. No need for rust removal or rust-preventive paint, significantly reducing painting labor Uses: For doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products. For galvalume steel siding, corrugated tin, aluminum building materials, and stainless steel products. Note: Rust that comes off in chunks needs to be removed. Thinning Method: If the paint has a high viscosity and is difficult to apply, please dilute it with a paint thinner solution (10% or less).

Color: blue, (sky)    Size: １／１２Ｌ

PRODUCT DESCRIPTION Product Description: Ideal for removing rust from iron, non-ferrous metals, paint removal, etc. Features: Rust removal of iron and non-ferrous metals, paint removal, ground polishing, scale removal after welding, deburring hard steel wire, brass plating is applied to wire material, so it is a safety type that does not rust or break. [Precautions] Please use under the maximum rotational speed. Wear protective glasses. LEGAL DISCLAIMER Please use with the maximum rotation speed. Wear protective glasses

Style: Cup Wire

Ideal for removing rust from iron, non-ferrous metals, paint removal, etc. [Use] Rust remover, paint removal, ground polishing, scale removal after welding, deburring. Features: Hard steel wire with brass plating and wire material, so it is a safety type with little rust and breakage. [Precautions] Please use with the maximum rotational speed. Please wear protective glasses.

- This laser marking device is equipped with 5 lines, 4 vertical lines and 1 horizontal line The vertical lines can be illuminated throughout the ceiling, walls and floors, and can be used efficiently as room dividers This laser marker can illuminate approximately 32.8 ft (10 m) indoors, and approximately 82.2 ft (25 m) outdoor - By adopting high-performance lasers, it allows for bright and easy-to-see line illumination, improving work efficiency It features screws that allow for precise line adjustments The design is dust-proof and splashproof, so it is perfect for outdoor work and can be safely used in sandy and dusty areas It is also a feature that it is cost-effective with a low price for its high performance 360° is convenient, and the line position can be adjusted, combining 2 rotations for precise positioning with vertical lines, reducing errors and greatly improving your work efficiency Accessories: Charger, 2 batteries, main unit, case, instruction manual. Due to being a Chinese import, there may be some scratches and dents We appreciate your understanding - Light source: Green visible semiconductor laser 520nm Laser standard: Class 2 Horizontal accuracy: ± 1mm/5m Vertical accuracy: ± 1mm/5m Right angle accuracy: 90 ± 0.1 Line width: 1.5mm/5m Operating time: Approx. 4 hours when fully lit Working temperature: -10°C to +50°C Dustproof and waterproof grade: IP54 Working location: Indoor and outdoor - Specifications may vary depending on the usage environment, etc ※Specifications may change due to product improvements Thank you for This product comes with a 12-month warranty from the date of purchase If by any chance, initial defects or breakdown occurs, please feel free to contact us We will promptly address your request

Style: 5 Line Marker

PRODUCT DESCRIPTION Point 1. Tank lid with new locking mechanism. Rubber gasket makes it easy to insert fingers to prevent leakage. Point 2. Hook hole for swivels and a drop prevention cord can be attached so you can work at high altitudes safely. Point 3. Full of ease of use. Safety ring allows for smooth insertion and removal of thick threads AMAZON.COM REVIEW . LEGAL DISCLAIMER Note (Disclaimer) > Please read before stock is sold out, there may be cases of order order or cancellation. In addition, please understand that the estimated delivery date of Amazon and the estimated delivery date of our product may vary. Product packaging may change without prior notice. ※We cannot accept returns due to customer's preferences __See more

Size: Jr.Plus    Style: Hand rolled    Color: Black

PRODUCT DESCRIPTION The new locking system allows the tank lid to be opened and closed smoothly, eliminating the need for threading. The tip of the bud thread is cut diagonally to reduce the return of the hand when holding the thread, making it easy to align. ● Comes with an ink button that allows you to mark dark and vivid marks. Comes with a hook hole that can be used with a hook clasp. Rubber gasket sealed tank prevents ink leakage. ● One-touch thread guide allows you to easily mark the corners. The karco has a spring loaded force for safe work. Adopts safety calco 2 that can be used with thick and fine threads. Even if the thread is pulled out to the end, the drum will not roll and bend the shaft. ● Folding handle type that does not get in the way. AMAZON.COM REVIEW .

Size: 10 ml    Style: Hand-rolled    Color: turquoise (turquoise blue)

Star Electric Production (SUZUKID) Non-Gas Soft Steel 0.8φ*0.8kg PF-01 Star Wire F-1 (General Name) Mild Steel Welding Wire for Non-Gas Self-shielded arc welding with flux wires is a welding method that does not require shielding gas. It is resistant to wind and suitable for outdoor welding. Star Electric Production (SUZUKID) Tip for Ultra Fine Point 0.8φ 5 Pieces P-608 Chip for Archery Series (SAY-XXX) / INOVA 140 (SIV-140)

- 【Use】For waterproofing gaps outdoors! Prevents rust and repairs holes in corrugated sheets, tin plates, containers, and more! - Features: Rubber adhesive butyl type with excellent water resistance and weather resistance Can be applied with water-based or oil-based paint, so repair marks are less noticeable - 【Features】Excellent rough surface adhesion, waterproof sealing, and long-term durability - 【Features】Excellent flexibility, fits well even on corners and rough surfaces! - Size: W0.8 in x L16.4 ft x T0.02 in (W75 mm x L5 m x T0.5 mm) - Material: Base material: Soft aluminum foil with special surface coating, Adhesive: Rubber type, Release paper: Paper

Style: Painted Waterproof Aluminum

- Economy type of foaming urethane: It is a one-liquid type suitable for partial application and is easy to handle even for those without specialized knowledge of urethane - Great value large capacity type: Suitable for extensive sealing, etc Environmentally friendly non-CFC type - High airtightness, high insulation, and condensation elimination: For filling gaps around sashes and doors, and for insulation, soundproofing, and preventing condensation - Low shrinkage after curing: The urethane foam after curing has minimal shrinkage, allowing for cutting, sanding, and painting after curing - Package Contents: LOCTITE Foaming Urethane Green Foam Big 570g x 2 tubes - Economy type one-liquid foaming urethane, versatile for filling all gaps, soundproofing, and pest control against insects and rodents

Size: 570 g (big), set of 2