16987 products in Others

The "Dye Q Series" uses nano-unit particles adhere to the surface of the material, giving it a finish that looks like it was dyed. Its adhesion will not crack or peel when pulled or twisted, allowing you to change the image without changing the texture of the material. For changing the color of leather products and repairing old and faded objects. Quick drying and workability, it can be used for a wide range of materials and applications. Features: Leather, fabric, wood, plastic and metal have a dyed-like finish. Easy to clean just spray The nanotechnology dye-type paint penetrates and adheres to the interior of the material. When using, please use protective equipment to ensure good ventilation and do not ingest mist or gas. Material Compatibility: See dye Q material application chart. (Simple description) Metal, leather, fabric, wood, and plastic have a finish that looks like a dyed by simply spray. The nanotechnology dye-type paint penetrates the nano-scale particles and adheres to the interior of the material. Can also be used to change the color of leather products and repair faded items. Quick drying and good workability, can be used for a wide range of materials and applications. Note: Some materials cannot be used with reptile leather, enamel, silicone, PE (polyethylene), etc. For details, please check the material compatibility chart. (Please contact us for materials that are not listed. Cannot be used if materials that are weak to solvents, oils cannot be removed completely, or have a coating such as water-repellent treatment on the surface. Before use, test application on an inconspicuous area to ensure there are no abnormalities such as impact and adhesion. If you apply a thick layer of fabric with a lot of suction, suede, or other long pile materials, it may cause stiffness. When spraying bright colors on dark materials, please make sure to use the "Dye-Q Basecoat" as a primer. When using the "Dye-Q Basecoat" base coat when used with materials that are often absorbed by such as fabrics. Please check for inconspicuous area before use. When the temperature is low (below 11°F (5°C) or lower, it is prone to drying defects, so please avoid using it. ● Avoid using when humidity is high (70% or more), as it is prone to whitening phenomenon (surface of the coating film is cloudy in the surface). Please use it outdoors without wind as much as possible, and make sure that it is sufficient for curing so that the paint does not stain the surroundings. While painting and drying, wear a mask or gloves to inhalate the mist of paint or contact the skin.

Color: sunrise orange    Pattern Name: Single Item

- Motorcycle Shoulder, Elbow and Knee Protectors CE Level 2 Clear - SAS-TEC proprietary triple flex with three corner shock absorbing material for flexible operation - Invisible protector fits all body types - Special foam urethane that instantly cures when impact is applied. Absorbs softly during weak impacts and absorbs hard at strong impact - Size (H x W x D): 8.1 x 5.3 x 0.4 inches (205 x 135 x 10 mm); Weight: Approx. 1.9 oz (55 g) (one sid

Pattern Name: Triple Flex: Level 2

- The Nintendo Switch combines the mobility of a handheld with the power of a home gaming system, offering unprecedented gaming and entertainment experiences - The Nintendo Switch and Dock connects the system to the TV and lets you play with your family and friends in the comfort of your living room - With a bright, high-definition display Nintendo Switch lets you bring your at-home gaming experience with you anywhere; to the Park, on an airplane, in a car -- anywhere - Attach the Joy-Con controllers to either side of Nintendo Switch for solo gaming on the go or detach them from Switch and use a Joy-Con controller in each hand - With multiple Joy-Con controllers from a number of systems (each sold separately), numerous people can gather for a variety of gameplay options

Edition: Nintendo Switch Neon

- Country of Origin: Japan - Contents: 110 pieces x 2 packs - Product Size (W x D x H): 3.3 x 6.4 x 3.2 inches (85 x 162 x 81 mm) - Brandt Name: Ocean - Manufacturer Name: Sanyo

- Thanks to the special rust inhibitor formulation, it can be applied directly over rust without removing it - Strong adhesion, can be applied to materials such as Galvalume steel sheets, aluminum, and stainless steel - Utilizes silicone acrylic resin for excellent weather resistance - Since it is an aerosol type, it is easy to apply and finish neatly even on fine parts such as shutters and fences - After use, it comes with a gas vent cap that allows you to dispose of the gas and leftover paint (Patent No. 2941761)

Color: ツヤ消しグレー    Size: 300ML

- Filling yourself with over 10.15 inches of thick, 3.45-inch girth isn’t just intense—it’s a challenge made for those who crave total fullness from a huge dildo - No need to stop and reload—200ml of fluid capacity keeps the action smooth, wet, and uninterrupted in this long-lasting squirting dildo. - A strong squeeze sends lube or liquid flowing exactly where you want it, perfect for cum play, deep glide, or that satisfying ejaculating dildo climax. - Liquid silicone delivers a skin-soft touch with strength to go deep—the material moves with your body while staying firm enough to hit every spot. - Thicker tubing means bigger release. Unlike standard squirting dildos, this one drenches with every squeeze thanks to its 5mm internal width. - No backflow, no mess. A built-in valve locks fluid in, keeping your bottle clean—something most ejaculating sex toys can’t do. - Stick it to the shower wall, floor, or bedpost—once the suction cup grabs on, the ride is all yours, hands-free and uninhibited.

Color: Squirting Style

- ⭐Moka Espresso Coffee Maker – Holiday Gift, Christmas Gift, Stocking Stuffer for Coffee Lovers Stovetop espresso maker, Moka pot & manual percolator. Available in 3, 6, 9 cups. This festive gift lets coffee lovers brew rich, barista-style espresso at home. 6-cup version crafted from food-grade anodized aluminum for premium brewing. - ⭐Easy to Use Moka Espresso Maker & Cuban Coffee Maker – Ideal Gift for Coffee Enthusiasts - Works on all gas and electric ranges, as well as portable camping stoves. Makes moka coffee on glass induction surfaces, though it heats slowly due to its non-magnetic base. A fantastic coffee lover gift for anyone who enjoys stovetop brewing. Also known as a Moka coffee brewer, Moka espresso maker, or Cafetera Cubana. - ⭐ Premium Stovetop Espresso at Home - Ideal Christmas Coffee Gift - Brew rich moka coffee, a low-pressure stovetop espresso, at home with the Milano Moka Stovetop Espresso maker. Elevate your coffee with milk from a steamer or frother for lattes and cappuccinos. This holiday coffee gift features a premium silicone moka pot gasket and 6-cup stovetop size. - ⭐Made in Italy Pressure Valve – Ideal for Holiday Gifting - The Milano Moka Pot features a larger, soft-touch grip with a burn guard to protect your fingers. The Italian Pressure Valve ensures secure pressure management, making it a wonderful holiday coffee gift for anyone who loves stovetop espresso. - ⭐Stylish Espresso Cafeteras - Ideal for Holiday Gifting or Secret Santa - With a silicone gasket and an array of vibrant colors, the Milano coffee pot is a great holiday gift for coffee lovers. Try it with your favorite coffee and double-walled glass espresso cups for an elegant touch. This Moka coffee maker is a must-have for anyone who loves coffee or enjoys giving gourmet coffee gifts.

Size: 6 espresso cups    Colour Name: White

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: ツヤ消し白    Size: 1/12L

- Outer Diameter: 3.0 inches (75 mm) - Screw diameter: M10 x P1.5 - Maximum operating speed: 12,000 min-1 - Applicable Models: Disc Grinder - Wire Material: Hard steel wire with brass plating

Style: カップワイヤ

- (1280 Wh power consumption with 35% smaller than conventional products) The market smallest 12V 100Ah LiFePO4 battery version takes up only 0.007 m³ space and is 35% smaller than conventional products, making it more efficient to use space in a camping car or other limited space. Exquisite technology, can provide enough power output at the same time with the 12V 100Ah mini size (100% 1280Wh energy storage) You can install this 12V 100Ah mini lithium-ion battery in a horizontal orientation according to your demand, so you can install it anywhere you want without worrying about space - Weight: 18.6 lbs (8.6 kg), 20% lighter than conventional products: Lightweight only 17.6 lbs (8.6 kg), and is 20% lighter than the iron phosphate battery to date. (12V 100Ah weighs 24.2 lbs (10.88 kg). Easy to manage, move and carry, this mini version LiFePO4 lithium battery is a great replacement for lead batteries and is a good choice for camping, sleeping in the car, fishing, etc - (All-around Safety for Outdoor Use) The newly adopted matte finish battery case makes the lithium battery durable and the case has IP65 waterproof capability for all kinds of fishing. Optimizes internal layout and structure to prevent crash damage. The dischargable temperature range from -4°F to 140°F (-20°C to 60°C), making it suitable for outdoor activities - (Upgraded BMS and Battery Cells) After 14 years of research and testing, the 12.8V 100Ah mini version has finally adopted BMS developed by LiTime, which is a lithium iron phosphate battery that provides powerful and stable performance throughout all cycles. All LiTime batteries insist on using Grade A automotive-level cells to ensure the high quality of the battery - 3 charging methods according to your requirements: LiTime 12V 100Ah Mini LiFePO4 Lithium-Ion battery can be charged using a dedicated LiFePO4 battery charger, and can be charged by solar panel or car charger. In addition to storing power at home, it can also be used in a variety of situations, such as camping cars, sleeping in a car, or outdoors

Style: 12V 100Ah Mini

- 【Creality CR-PETG Filament】Creality CR-PETG combines the benefits of PLA and ABS to reach Eco-friendly and odorless performance. This PETG Filament is feature in good toughness to avoid cracking and warping, enbale excellent 3D printing. - 【Toughness-enhanced PETG】 Creality PETG choose durable and strong material that delivers excellent clarity, light transmission, and a glossy finish. It is recommended to use a printing temperature of 220-250°C and a base plate temperature of 70-80°C for better printing results. - 【Tangle-Free & Neatly Wound】We ensure that every PETG filament is tightly and neatly wrapped by utilizing full mechanical winding, which effectively minimizes tangles, filament snapping, and line breakage. - 【No Clogging & No Bubbles】Our filaments are thoroughly dried and carefully vacuum sealed to protect them from moisture and dust, which ensures that there will be no issues with clogging or bubbling during printing. Our PETG is designed to be perfectly compatible with the majority of 1.75mm FDM 3D printers, especially suitable for Creality 3D Printers! - 【High Precision & Consistent Performance】Our PETG filament boasts a diameter of 1.75mm, ensuring utmost accuracy with a tolerance of only +/- 0.03mm. With strict quality control and impeccable dimensional precision, Ender PETG filament guarantees a smooth and steady feeding during printing.

Color: Petg-1kg Grey

Shaped to fit the palm of your hand, so you can use it without stress as you handle your hands. Compact size makes it convenient for serving dishes. It is helpful when you don't want to touch it directly while cooking, such as hot, cold, or smell.

Color: 7-Silver