15838 products in Others

- Union elbow for joining two tubes at an angle - Accepts nylon and polyurethane tube fittings - Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength - Working pressure of up to 150 psi - Meets NSF/ANSI standards 14, 51, and 61 for quality assurance

Size: 3/16" Tube OD

- SPECIFICATIONS---The product has an oil capacity of 900cc, a low‑pressure output of 20 kg/cm², and a high‑pressure output of 700 kg/cm². Its overall length is 23.6 inches (600m) and it weighs 21.2 lbs (9.6 kg). The oil pipe coupling uses a ZG3/8 thread and comes with a 71‑inch (1.8m) hose. These specifications are suitable for a range of common hydraulic tasks. - OIL CAPACITY AND STRUCTURE---The CP700 hydraulic pump body has a relatively large oil reservoir, which can meet the needs of most hydraulic tools. It includes a quick connector and a threaded locking mechanism for a stable connection. The compact design makes it easy to move and store. The two‑stage rapid oil discharge allows it to lift cylinders or work together with other hydraulic equipment. - COMPONENTS AND OPERATION---This hydraulic pump is equipped with a ZG 3/8‑inch connector, a non‑slip handle, the pump body, a release valve, and a hose. The handle has a textured surface for a more secure grip. The release valve controls oil return, and the overall operation is straightforward. It can be used for personal projects or general workshop applications. - PACKAGING---The pump is packed in corrugated cardboard with internal padding to reduce movement during transit. The packaging is intended to help keep the unit in good condition when it arrives. - APPLICATIONS---This manual hydraulic pump can be used with various split‑type hydraulic tools, including punching machines, cutting machines, bending machines, hydraulic jacks, hydraulic pullers, split clamps, flange spreaders, and split cylinders. Depending on the task, it can be paired with different tools to carry out the corresponding hydraulic work.

Size: with oil gauge

- SPECIFICATIONS---The product has an oil capacity of 900cc, a low‑pressure output of 20 kg/cm², and a high‑pressure output of 700 kg/cm². Its overall length is 23.6 inches (600m) and it weighs 21.2 lbs (9.6 kg). The oil pipe coupling uses a ZG3/8 thread and comes with a 71‑inch (1.8m) hose. These specifications are suitable for a range of common hydraulic tasks. - OIL CAPACITY AND STRUCTURE---The CP700 hydraulic pump body has a relatively large oil reservoir, which can meet the needs of most hydraulic tools. It includes a quick connector and a threaded locking mechanism for a stable connection. The compact design makes it easy to move and store. The two‑stage rapid oil discharge allows it to lift cylinders or work together with other hydraulic equipment. - COMPONENTS AND OPERATION---This hydraulic pump is equipped with a ZG 3/8‑inch connector, a non‑slip handle, the pump body, a release valve, and a hose. The handle has a textured surface for a more secure grip. The release valve controls oil return, and the overall operation is straightforward. It can be used for personal projects or general workshop applications. - PACKAGING---The pump is packed in corrugated cardboard with internal padding to reduce movement during transit. The packaging is intended to help keep the unit in good condition when it arrives. - APPLICATIONS---This manual hydraulic pump can be used with various split‑type hydraulic tools, including punching machines, cutting machines, bending machines, hydraulic jacks, hydraulic pullers, split clamps, flange spreaders, and split cylinders. Depending on the task, it can be paired with different tools to carry out the corresponding hydraulic work.

Size: without oil gauge

- WATER&FOOD USE: The Tubing is made from safe,non-toxic materials, It is NSF Certified; Blue RO Tubing is commonly used to distinguish filtered water from raw source water. On most reverse osmosis systems the blue tubing will start immediately after the membrane - SIZE &COMPATIBLE WITH: Outside diameter 1/4 quarter inch 6.5mm, Inside diameter 0.142 inch 4.15mm, inside/outside wall thickness 1.46mm; Compatible with all quick connect fittings we sell or others' that utilize 1/4" Polyethylene Tubing. The 1/4" Measurement is the outside diameter of the tubing and will work with all Push-Connect fittings - FUNCTION&QUALITY: Use with Reverse Osmosis Systems, Drinking Water Filters, Liquid Dispensers,Coffee Machine,Ice Maker, Refrigerators and many other application requiring connections for transfer of water and liquids. It offers prime pressure and temperature ratings and has outstanding resistance to environmental stress cracking. it has been put through rigorous structural and material testing to help ensure they meet the standards for all applications. - NOTE:Please use tube cutter cut the PE tube,veriffy that the end of the tube has been cut squarely,tube cutter with quality blade is suitable for cutting plastic tubings.Please Search (ASIN: B06WD5Z8WK) to buy.

Color: Blue    Size: 1/4 inch OD, 100 feet

- WATER&FOOD USE: The Tubing is made from safe,non-toxic materials, It is NSF Certified; Blue RO Tubing is commonly used to distinguish filtered water from raw source water. On most reverse osmosis systems the blue tubing will start immediately after the membrane - SIZE &COMPATIBLE WITH: Outside diameter 1/4 quarter inch 6.5mm, Inside diameter 0.142 inch 4.15mm, inside/outside wall thickness 1.46mm; Compatible with all quick connect fittings we sell or others' that utilize 1/4" Polyethylene Tubing. The 1/4" Measurement is the outside diameter of the tubing and will work with all Push-Connect fittings - FUNCTION&QUALITY: Use with Reverse Osmosis Systems, Drinking Water Filters, Liquid Dispensers,Coffee Machine,Ice Maker, Refrigerators and many other application requiring connections for transfer of water and liquids. It offers prime pressure and temperature ratings and has outstanding resistance to environmental stress cracking. it has been put through rigorous structural and material testing to help ensure they meet the standards for all applications. - NOTE:Please use tube cutter cut the PE tube,veriffy that the end of the tube has been cut squarely,tube cutter with quality blade is suitable for cutting plastic tubings.Please Search (ASIN: B06WD5Z8WK) to buy. - NOTE:Please use tube cutter cut the PE tube,veriffy that the end of the tube has been cut squarely,tube cutter with quality blade is suitable for cutting plastic tubings.Please Search (ASIN: B06WD5Z8WK) to buy.

Color: Yellow    Size: 1/4 inch OD, 16.4 feet

- NPT SPEC/SIZE CHECK: NPT1/4-18 Male x NPT1/2-14 Female Brass Pipe Fitting Adapter, can be used in wet environments. The NPT (National (American) Pipe Thread) size is the American standard 60 degree taper pipe thread, is NOT equal to joint diameter size measured by common tools like ruler, tape measure or vernier caliper. Please find the correct size comparison information on the detailed page before purchasing! - THREADS: 1/4 NPT Male Thread (OD approx 0.52" - 0.54", 18 Threads Per Inch) x 1/2 NPT Female Thread (ID approx 0.73" - 0.8", 14 Threads Per Inch), not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation. - MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe fittings. - USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. NPT threads are tapered, and it is recommended to use them together with Pipe Thread Sealant or Teflon Plumbers Tape for sealing. Not recommended to use gaskets. - STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all fittings must be used with sealing tape.

Color: 2P 1/4"Male x 1/2"Female

- NPT SPEC/SIZE CHECK: NPT1/4-18 Male x NPT1/2-14 Female Brass Pipe Fitting Adapter, can be used in wet environments. The NPT (National (American) Pipe Thread) size is the American standard 60 degree taper pipe thread, is NOT equal to joint diameter size measured by common tools like ruler, tape measure or vernier caliper. Please find the correct size comparison information on the detailed page before purchasing! - THREADS: 1/4 NPT Male Thread (OD approx 0.52" - 0.54", 18 Threads Per Inch) x 1/2 NPT Female Thread (ID approx 0.73" - 0.8", 14 Threads Per Inch), not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation. - MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe fittings. - USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. NPT threads are tapered, and it is recommended to use them together with Pipe Thread Sealant or Teflon Plumbers Tape for sealing. Not recommended to use gaskets. - STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all fittings must be used with sealing tape.

Color: 4P 1/4"Male x 1/2"Female

- 【Product Name】Tee Shape Push-to Connect Fittings - 【Material】Plastic and Copper - 【Size】4mm Tube OD x 1/4" NPT Thread - 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F - 【Features】√ Freely change pipeline direction after installation √ Easy to insert or pull trachea manually without tools

Size: 4mmOD x 1/4"MNPT    Number of Items: 10

- NPT SPEC/SIZE CHECK: NPT3/8-18 Male x NPT1/2-14 Female Brass Pipe Fitting Adapter, can be used in wet environments. The NPT (National (American) Pipe Thread) size is the American standard 60 degree taper pipe thread, is NOT equal to joint diameter size measured by common tools like ruler, tape measure or vernier caliper. Please find the correct size comparison information on the detailed page before purchasing! - THREADS: 3/8 NPT Male Thread (OD approx 0.64" - 0.68", 18 Threads Per Inch) x 1/2 NPT Female Thread (ID approx 0.73" - 0.8", 14 Threads Per Inch), not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation. - MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe fittings. - USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. NPT threads are tapered, and it is recommended to use them together with Pipe Thread Sealant or Teflon Plumbers Tape for sealing. Not recommended to use gaskets. - STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all fittings must be used with sealing tape.

Color: 3/8" M NPT Thread x 1/2" F NPT Thread

- 【Product Name】Tee Shape Push-to Connect Fittings - 【Material】Plastic and Copper - 【Size】3/8" Tube OD x 3/8" NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter - 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F - 【Features】√ Freely change pipeline direction after installation √ Easy to insert or pull trachea manually without tools

Size: 3/8"OD x 3/8"MNPT    Number of Items: 2

- 【Product Name】Tee Shape Push-to Connect Fittings - 【Material】Plastic and Copper - 【Size】1/4" Tube OD x 1/8" NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter - 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F - 【Features】√ Freely change pipeline direction after installation √ Easy to insert or pull trachea manually without tools

Size: 1/4"OD x 1/8"MNPT    Number of Items: 2

- 【Product Name】Tee Shape Push-to Connect Fittings - 【Material】Plastic and Copper - 【Size】1/4" Tube OD x 1/8" NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter - 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F - 【Features】√ Freely change pipeline direction after installation √ Easy to insert or pull trachea manually without tools

Size: 1/4"OD x 1/8"FNPT    Number of Items: 2