274 products in Components

- 80 PLUS Platinum efficiency (up to 93.8%) - ATX 3.0 PSU with full support for PCIe 5.0 GPUs and GPUs with 6+2 pin connectors - Handles massive power excursions - Virtually inaudible Silent Wings 135mm fan - Funnel-shaped fan opening on PSU case for high airflow intake

Style: 1200W Platinum ATX3.0

- OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure - 200 TO 1800 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed - MORE EFFICIENT TECHNOLOGY: The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors - EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature - TECHNICAL DATA: Fan speed: 200–1800 rpm (0 rpm

Color: black    Style: P12 PWM PST (black)

- Memory storage capacity : 64.0 GB - Compatible devices : Gaming Console - Spdif connector type : Optical - System bus standard supported : SATA 3

Size: ATX    Style: MAG X670E TOMAHAWK WIFI

- NVIDIA Ampere Streaming Multiprocessors - 2nd Generation RT Cores - 3rd Generation Tensor Cores - Powered by GeForce RTX 3060.Avoid using unofficial software - Integrated with 12GB GDDR6 192-bit memory interface

Style: GAMING   

- 2 x SFF-8643 mini-SAS HD Internal Connectors - Up to 12Gb/s - Improved Connectivity - High Performance - Easy Installation

- This M.2 NGFF/NVME Length Extend Adapter is used for extending the length of your M.2 SSD (Solid State Drive). It is commonly used in custom PC builds or upgrading existing systems where there is a need to position the SSD in a different location within the computer case. - Model: M.2 NGFF/NVME; Support: 2230 to 2242/2260/2280, 2242 to 2280, 2260 to 2280; Total Size: 50 x 22 x 0.7mm/1.97 x 0.87 x 0.03-inch (L*W*T); In the package of: 2 x SSD Extension Bracket, 2 x Screws - With this adapter, you have the flexibility to position your M.2 NGFF/NVME SSD in a more convenient location within your computer case. This can help with cable management and optimize airflow for better cooling. Detachable design, can be easily broken off without using other tools. - Steps of installation: 1. Use a screwdriver to unscrew the screws on the back; 2. Align the end of the hard drive with the screw hole of the extension bracket; 3. Re-tighten the screws and clamp them together. - Please note that this product does not support 2242 to 2260. You need to cut it off to adjust the length according to your requirements.

- This M.2 NGFF/NVME Length Extend Adapter is used for extending the length of your M.2 SSD (Solid State Drive). It is commonly used in custom PC builds or upgrading existing systems where there is a need to position the SSD in a different location within the computer case. - Model: M.2 NGFF/NVME; Support: 2242-2280; Total Size: 38 x 22 x 0.9mm/1.5 x 0.87 x 0.04-inch (L*W*T); In the package of: 1 x SSD Extension Bracket, 1 x Screw - With this adapter, you have the flexibility to position your M.2 NGFF/NVME SSD in a more convenient location within your computer case. This can help with cable management and optimize airflow for better cooling. - Steps of installation: 1. Use a screwdriver to unscrew the screws on the back; 2. Align the end of the hard drive with the screw hole of the extension bracket; 3. Re-tighten the screws and clamp them together. - It is important to check compatibility with your motherboard or system specifications.

- A-Tech RAM Memory compatible for select DDR4 Servers & Workstation systems only; (*WILL NOT WORK with Desktop Computers, Laptop Computers, or PCs of any kind*) - Single 8GB RAM Module; DDR4 DIMM 288 Pin; Speeds up to 2400MHz PC4-19200 (PC4-2400T) - ECC Registered RDIMM; 1Rx4 - Single Rank x4; JEDEC DDR4 standard 1.2V - Improves system performance, workload capacity, and reduces bottlenecks by increasing memory (RAM) resources - Note: This memory is ECC Registered and cannot be mixed with different ECC types such as ECC Unbuffered, ECC Load Reduced, or Non-ECC Unbuffered; (Memory compatibility can vary among different system models and their installed components; please verify compatibility and follow memory channel guidelines to ensure maximum performance) - Each A-Tech memory module is built and tested for superior performance and trusted reliability - All A-Tech products are covered with a Limited Lifetime Warranty and are backed by our top rated support team to help guide you every step of the way

Size: 8GB | 1Rx4    Style: 2400MHz (PC4-19200)    Color: Single Module

- Adherence to JEDEC and compliance to RoHS with respect to environmental protection regulation, production and manufacturing - All new generation product of DRAM module. Strict test and verification procedures are performed for products - Lifetime warranty and Free technical support - Installation video is attached in product image

Size: 32 Go (1 x 32Go)

- PCIe Gen 4x4 interface with read speeds up to 7,000MB/s and write speeds up to 6,500MB/s - NVMe 1.4 support allows for higher performance, lower latency, and lower power consumption - Available in massive storage capacity options ranging from 1TB to 4TB - TBW: 2400 - 5-year limited warranty *The SSD warranty is based on the TBW or Warranty period

Capacity: 4TB    Style: Standard

- Certified gold - supporting 80 Plus Gold efficiency up to 90% and optimized for C6/C7 States ready - Non modular connectors – 24 pin x 1/ 4+4 pin x 1/ SATA x 8/ PCI-E x 4/ peripheral x 4/ FDD x 1 - Ultra quiet 120mm fan – dynamic Bearing fan s superior cooing performance and silent operation - Single +12V rail design - powerful 12V+ Single rail supports today's GPU demands supporting DC to DC design for stable, reliable power - Industry grade protections - (OPP) Over Power, (OVP) Over Voltage, (UVP) Under Voltage, and (SCP) short circuit protections - 5 year warranty

Style: Gold    Color: Black

- Compatible with: LSI 9300-8i; Controller: LSI/Broadcom SAS3008 (12Gb/s SAS) - Firmware (FW): HBA IT Mode (Non-RAID); Data Transfer Rate: up to 12Gbps SAS, SATA 6Gbps - Host Interface: PCIe 3.0 x8; Internal Connectors: 2× Mini-SAS HD SFF-8643. --Direct attach up to 8 drives, and expand via external SAS Expander for large arrays - PERFECT FOR: ZFS, FreeNAS/TrueNAS, unRAID, Proxmox, ESXi home-lab & NAS storage - Packing List: HBA Card ×1; 2× SFF-8643 to 4× SATA cables (8× SATA ends). --Cables in box are for SATA drives. They are not compatible with SAS drives. To connect SAS drives, use SFF-8643 to 8482 SAS cables (sold separately) or our matched HBA + cable kit.