1883 products in Computers

- Large mesh front panel with massive air intakes. - Supports up to 5 fans: 3 x 120mm RGB fixed mode fans included. - Supports up to 240mm radiator. - Swing tempered glass side panel. - I/O Panel: Power, Reset, 1 x USB3.0, 2 x USB2.0 , MIC/HD-AUDIO.

Color: NX200M RGB

- Motherboard support: Up to M-ATX - 2.5" SSD: 1 - 3.5" HDD / 2.5" SSD (Convertible): 2/1 - Graphics Card Support: Up to 275 mm - CPU Cooler Support: Up to 150 mm.PSU Support: Up to 150 mm

Color: NX200M

- Item Package Dimension: 22.4409L X 17.28343W X 1.73228H Inches - Item Package Weight - 20.8 Pounds - Item Package Quantity - 1 - Product Type - Electronic Switch

- SFF 8087 to 4 sata breakout cable, sas cable to sata, host side internal mini sas 36 pin male connect to motherboard or sas raid controller, SATA breakout cable connect to backplane or 4 HDD, sas to sata adapter provide secure internal connection between sas raid controller to sas driver cable, NOTE: Do not connect Mini sas connector SFF 8087 on your backplane, otherwise the mini sas to sata cable will not work with them - Mini-sas to sata, sff-8087 port for connection to sas hba or pcie controller, mini sas 8087 sata with locking latch, internal mini sas to 4 x sata cable providing a reliable internal link between the serial mini sas controller to sata target, sff-8087 sas breakout cable data transfer rate up to 6Gbs per drive - SFF8087 forward breakout cable, 8087 male sas connector for expand storage use, sas to sata cable are labled, simple up your cable management game, mini sas to sata female 7pin data transfer cable easy link serial scsi controller and sata connector - SFF-8087 to 4x sata build with thin sas cable and tape/braid weaved design, length choice mini sas to sata short/sff-8087 breakout 0.5m and long sas breakout cable/mini sas to sata 3.3ft, breaided mini sas to 4 sata cable easy to route after installation, the sas to sata cable is the good choice for DIY and professional installers - What you Get: Mini sas to sata cable (1.6FT/0.5M, 2xPCS) mini sas 36pin (SFF-8087) male to 4 sata 7pin female cable

Size: 1.6FT 2 PACK

- M.2 Standoff and Screw for motherboard NGFF/NVMe Kit，Screw specification M2*3 (mm) - compatible Asus13020 M.2 SSD Mounting Kit Standoff + Screws for Motherboard . - M.2 Screw + Screw Hex Nut Stand Off for motherboard NGFF - Application: Perfect for universally laptop notebook repair, applied in electronics, computers, PC board, DIY hobby etc. - Package Content:Hex head jackscrews*4、Flat head Screws*4、Transparent screw washers*4、Screwdriver*1

- Data Rate: 10/100/1000M - Interface: RJ-45; Cable Type: CAT.5e - Reach: up to 100 meters transmission over CAT.5e - Wide Compatibility - for Cisco, Cisco Meraki.

Style: 1) 100M/1G-T: 100m    Color: x1

- Data Rate: 1.25Gb/s - Interface: RJ-45 - Cable Type: CAT.5e - Reach: up to 100 meters transmission over CAT.5e - Wide Compatibility - for Cisco, Cisco Meraki, Ubiquiti, Fortinet, D-Link, Supermicro, TP-Link, Broadcom, Linksys, TP-Link TL-SM331T and Other Open Switches.

Style: 2) 1G-T: 100m    Color: x1

- Data Rate: 1.25Gb/s - Interface: RJ-45; Cable Type: CAT.5e - Reach: up to 100 meters transmission over CAT.5e - Compatible with Cisco GLC-T/SFP-GE-T, Meraki MA-SFP-1GB-TX, Ubiquiti UF-RJ45-1G, Fortinet, D-Link, Supermicro, Netgear, TP-Link TL-SM331T and More

Model: 2. 1G-T: 100m    Color: x10

- Data Rate: 10/100/1000M - Interface: RJ-45; Cable Type: CAT.5e - Reach: up to 100 meters transmission over CAT.5e - Wide Compatibility - for Cisco, Cisco Meraki.

Model: 1. 10/100/1000M-T: 100m    Color: X2

- 10GBASE-SR SFP+ to LC Optical 10 Gigabit Ethernet Fiber transceiver module, 10GbE Multimode SFP+(compatible with both 62.5um and 50um LC cables; supports OM1/OM2/OM3/OM4 fiber cables), Duplex LC connector, 850nm, DDM, up to 300m. - [Wide Compatibility] Compatible with Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, Mikrotik, Netgear, D-Link, Supermicro, TP-Link and Other Open Switches. - [Easy to Use] Easy installation, plug and play, fully hot-pluggable with ESD protection. Widely used in network switch, server, or NIC with SFP+ to a 10 Gigabit fiber channel network with multimode LC for Network Attached Storage(NAS), Storage Area Network(SAN), and High Performance Computing(HPC) applications. - [Durable & Low Power Consumption] Adpot high quality alloy, the shell is strong and wear-resistant; Low power consumption(less than 1.05watt) and low EMI emission design. SFP MSA Compliant, IEEE 802.3ae Compliant. Operating Temperature: 0°C to 70°C. - [What you Get] 10x 100% tested 10GBase-SR modules, 30-day Money-Back guarantee with 3-Year warranty and lifetime tech support. 10Gtek is a manufacturer of transceiver, customized service is available.

Style: x10

- Data Rate: 1.25Gb/s - Interface: RJ-45; Cable Type: CAT.5e - Reach: up to 100 meters transmission over CAT.5e - Compatible with Cisco GLC-T/SFP-GE-T, Meraki MA-SFP-1GB-TX, Ubiquiti UF-RJ45-1G, Fortinet, D-Link, Supermicro, Netgear, TP-Link TL-SM331T and More

Model: 2. 1G-T: 100m    Color: x4

- IN THE BOX: (1) 10-foot USB 2.0 cable with A Male to Micro B connectors - COMPATIBILITY: USB-A printers and hard drives; Micro-B Android phones and tablets - PERFORMANCE: Supports up to 480 Mbps data transmission speed; charging capability up to 2100 mA - USES: Ideal for charging Android phones and tablets or connecting PC peripherals such as hard drives, printers, and more - DURABLE DESIGN: Gold-plated connectors resist corrosion for signal purity; thin and flexible cable with compact connector head works with nearly all cases

Size: 10 Feet    Style: 1 Pack