1856 products in Computers

- Data Rate: 10/100/1000M - Interface: RJ-45; Cable Type: CAT.5e - Reach: up to 100 meters transmission over CAT.5e - Compatible with Cisco GLC-T/SFP-GE-T

- Data Rate: 1.25Gb/s - Interface: RJ-45; Cable Type: CAT.5e - Reach: up to 100 meters transmission over CAT.5e - Wide Compatibility - for Cisco, Cisco Meraki, Fortinet, Ubiquiti, D-Link, Supermicro, TP-Link, Broadcom, Linksys, TP-Link TL-SM331T and Other Open Switches.

Model: 2. 1G-T: 100m    Color: X2

- High-speed USB 3.0 performance of up to 150MB/s(1) [(1) Write to drive up to 15x faster than standard USB 2.0 drives (4MB/s); varies by drive capacity. Up to 150MB/s read speed. USB 3.0 port required. Based on internal testing; performance may be lower depending on host device, usage conditions, and other factors; 1MB=1,000,000 bytes] - Transfer a full-length movie in less than 30 seconds(2) [(2) Based on 1.2GB MPEG-4 video transfer with USB 3.0 host device. Results may vary based on host device, file attributes and other factors] - Transfer to drive up to 15 times faster than standard USB 2.0 drives(1) - Sleek, durable metal casing - Easy-to-use password protection for your private files(3) [(3)Password protection uses 128-bit AES encryption and is supported by Windows 7, Windows 8, Windows 10, and Mac OS X v10.9 plus; Software download required for Mac, visit the SanDisk SecureAccess support page]

Size: 128GB

- IDE Molex to SATA Power Cable, Converts 4-Pin male plug into 2x 15-Pin Serial ATA Female Connectors. - Cable: 1007 18AWG, Length: approx. 20cm, Conductor: Copper. - Installation: Connect to motherboard 4-Pin IDE Molex Connector and the other side Connect to15-Pin Hard Drives or CD ROM Drives Plug. - Use to adapt older power supply uints for use with new SATA devices, and powering two devices from one interface. - Application: suitable for Hard Drives, Solid State Drives, CD ROM Drives, HHD, SSD, DVD Drives etc.

Size: Molex Male to dual SATA female

- Signature ModFlex™ Sleeving - High-grade Copper Wiring - Rich and Vibrant Color - Extends 24-pin ATX Cables - 100% Heatshrink-free

Style: ATX 24-pin    Color: Black + Red

- Signature High-density ModFlex™ Sleeving - Up to 6Gb/s Transfer Speeds - 100% Heatshrink-free - Multiple Colors Available - Precision-molded Connectors

Style: Select    Color: Select Color

- Signature ModFlex Sleeving - High-grade Copper Wiring - Rich and Vibrant Color - Extends Internal USB 3.0 Cables - Straight (180 degree) connector

Style: Internal USB 3.0    Color: Black

- Signature ModFlex™ Sleeving - High-grade Copper Wiring - Rich and Vibrant Color - Extends 24-pin ATX Cables - 100% Heatshrink-free

Style: ATX 24-pin    Color: White

- [1TB] Exceptional performance up to 7400MB/s read, 6500MB/s write; 1000TBW - 2x faster than PCIe Gen 3 SSDs - Designed with a heatsink to keep your rig cool for better performance and power efficiency - Up to 40% less power consumption than DRAM cache-enabled PCIe Gen 4 SSDs - Host Memory Buffer (HMB) 3.0 activates the DRAM cache function of your device for a smoother transfer speed and seamless performance - Compatible with PlayStation 5 - Five-year limited warranty

Capacity: 1TB    Style: NM790 w/ Heatsink    Pattern: Gamers

- A-Tech RAM Memory compatible for select DDR4 Servers & Workstation systems only; (*WILL NOT WORK with Desktop Computers, Laptop Computers, or PCs of any kind*) - 128GB RAM Kit (8 x 16GB Modules); DDR4 DIMM 288 Pin; Speeds up to 2933MHz PC4-23400 (PC4-2933Y) - ECC Registered RDIMM; 1Rx4 - Single Rank x4; JEDEC DDR4 standard 1.2V - Improves system performance, workload capacity, and reduces bottlenecks by increasing memory (RAM) resources - Note: This memory is ECC Registered and cannot be mixed with different ECC types such as ECC Unbuffered, ECC Load Reduced, or Non-ECC Unbuffered; (Memory compatibility can vary among different system models and their installed components; please verify compatibility and follow memory channel guidelines to ensure maximum performance) - Each A-Tech memory module is built and tested for superior performance and trusted reliability - All A-Tech products are covered with a Limited Lifetime Warranty and are backed by our top rated support team to help guide you every step of the way

Size: 16GB | 1Rx4    Style: DDR4-2933 (PC4-23400)    Color: 8 Module Kit

- A-Tech RAM Memory compatible for select DDR4 Servers & Workstation systems only; (*WILL NOT WORK with Desktop Computers, Laptop Computers, or PCs of any kind*) - Single 128GB RAM Module; DDR4 DIMM 288 Pin; Speeds up to 2933MHz PC4-23400 (PC4-2933Y) - ECC Registered RDIMM; 4Rx4 (3DS 2S2Rx4) - Quad Rank x4; JEDEC DDR4 standard 1.2V - Improves system performance, workload capacity, and reduces bottlenecks by increasing memory (RAM) resources - Note: This memory is ECC Registered and cannot be mixed with different ECC types such as ECC Unbuffered, ECC Load Reduced, or Non-ECC Unbuffered; (Memory compatibility can vary among different system models and their installed components; please verify compatibility and follow memory channel guidelines to ensure maximum performance) - Each A-Tech memory module is built and tested for superior performance and trusted reliability - All A-Tech products are covered with a Limited Lifetime Warranty and are backed by our top rated support team to help guide you every step of the way

Size: 128GB | 4Rx4 (2S2Rx4)    Style: DDR4-2933 (PC4-23400)    Color: 1 Module

- 【Compatible with M.2 NVME】Eluteng m.2 to usb adapter, it supports M.2 NVME in 2230/2242/2260/2280mm sizes SSD, this nvme usb adapter compatible with M-key(Not for B-Key and B&M-Key). Note: M.2 NGFF, PCI-E AHCI protocol is not supported. - 【High Speed & Stability】The m.2 ssd usb adapter external output port is USB3.1 GEN2 USB Type-A. The theoretical transfer speed is 10 Gbps for NVME protocol, with a substantial increase in read speed and a rise in transfer speed for large files; using JMS583 chip with UASP and TRIM functions. Reduced CPU load, lower consumption, faster speed and higher durability. - 【4TB large Capacity】This nvme ssd to usb adapter up to 4TB SSD can be installed. backward compatible with USB3.0/USB2.0 interface, read speed: 1000MB/s (This data is for reference only). Compatible with Windows 7/8/10 / Mac OS / Linux systems. - 【Heat Dissipation Design】 PCBA board surface is processed with copper rod to prevent abnormal heat generation of the SSD. Heat dissipating silicon based chip design is used. In addition, a heat dissipation silicone patch is included to effectively prevent excessive temperature. - 【Simple and portable】 M.2 NVME SSD compatible. The usb nvme adapter comes with screws and screwdriver, easy to install and portable. - 【Plug and Play】This nvme usb adapter uses the cooling pad and aluminum alloy heatsink included in the package to help the SSD transfer heat better,Plug and play, no need for any drivers, very convenient to use. - 【Service Guarantee】If you have any questions about our nvme m.2 to usb adapter,please feel free to contact us, and our service team will answer or solve your questions at any time.

Model: M.2 NVME to USB