1480 products in Electronics

- Made of pure metal,giving it a longer service time and exceptional strength for heavy duty. Note: When you adjust the angle under the conditions that the weight on both sides of the joint head is not balanced, it will damage the screw that connects the two halfs of the joint. SO PLEASE hold the rear part of the arm to keep the arm balanced firstly before adjusting the angle. - Its height is adjustable,satisfying your various shooting needs. - Easily attach to other equipment with its knob and spiral screw. - Rubber padded,giving you a comfortable feeling and preventing it from sliding when you move. - Its sturdy 3 legs structure at the bottom ensures your equipments stable. Note:Stand only!the monolight is NOT included!

Model: SC320

- 【Upgraded Quick Setup Turtle Base】 Featured with a revolutionary spring ring locking mechanism, our light stand base enables the chassis legs to pop up by gravity in seconds. All you need to do is to pull the locking sleeve on the top of the base. The three legged structure provides stability to hold your photography equipment - 【Durable Reinforced Rod】 Made of industry grade stainless steel, the central pole of this photography C stand is thickened and forged with large diameters of 1.2in (30mm), 1.4in (35mm), and 1.6in (40mm), delivering a reliable central bearing with longer service time and a maximum load capacity of 44lb/20kg - 【Versatile Arm with High Load Capacity】 The 4.2ft (127cm) holding arm boasts a maximum load capacity of 17.6lb (8kg), finished with a 1/4" stud on one end and a 3/8" stud on the other end for attaching a strobe light, CB60 RGB 70W/RGB1200 LED video light, reflector, umbrella, SF30120Q/SF-RPBO26 softbox and other photographic equipment. You can also install your light stand attachment with a 5/8" mount onto either end of this grip arm - 【Adjustable Height】Our C stand can be adjusted in height from 5ft (153cm) to 10.5ft (320cm), accommodating different lighting needs. The center stand is equipped with a built in buffer spring to reduce the impact of sudden drops of the installed equipment and protect the equipment when adjusting the height - 【Flexible Use】Two premium and standard grip heads are crafted with 4 different mounting channels of 5/8", 1/2", 3/8", and 1/4", accepting any compatible accessories for your enhanced photography solutions. These mounting adapters enable height and angle adjustment (360° rotatable) for enhanced flexibility, with an excellent locking system for stability and safety

Model: SC320Q

- 【Introducing NEEWER BASICS】 Simple and practical, NEEWER Basic is an economical product line that focuses on essential functions and designs, without unnecessary extras and materials. The SC320 Lite is a heavy duty C stand made from stainless steel, equipped with a sturdy boom arm and two grip heads to securely hold various heavy photography equipment for different setups and effects. Its metal turtle base ensures solid support without wobbling - 【Heavy Duty 100% Stainless Steel C Stand】 Made from 100% stainless steel, this photography light stand offers exceptional strength and rust resistance, perfect for both studio and outdoor shooting. The boom arm withstands up to 17.6lb (8kg), while the center column supports up to 44lb/20kg, designed to support heavy equipment such as softboxes and umbrellas. And the column features a spring loaded structure inside to protect the mounted device from shocks and impact caused by sudden drops - 【Adjustable Height & Boom Arm】 The telescopic center column with 3 sections adjust from 4.7' to 10.5' (146cm to 320cm), allowing you to position your equipment at various heights as needed. The holding arm extends up to 4.2' (128cm) and can tilt up and down for versatile lighting coverage and adjustable angles - 【Wide Compatibility with 1/4" & 3/8" Screws】 Featuring 1/4" & 3/8" mounting screws, this C stand with boom arm can connect studio monolights, LED video lights, softboxes, reflectors, photography umbrellas, among others with 1/4" & 3/8" threads. Includes two grip heads with 4 different sized holes to help lock rods, arms, and umbrella shafts while providing flexible angle adjustment - 【Foldable & Quick Setup】 This adjustable lighting stand with a foldable turtle base is effortless to set up, store, and transport. Equipped with simple metal knobs, it allows quick adjustments and secure locking without the need for tools. The three legs are fitted with nonslip rubber pads to prevent sliding and protect wood and ceramic floors from scratches

Model: SC320 Lite

- This pre-owned product is not Apple certified, but has been professionally inspected, tested and cleaned by Amazon-qualified suppliers. - No signs of cosmetic damage (scratches, dents, etc.) will be visible when the product is held 30 centimeters away. - This product will have a battery that exceeds 80% capacity relative to new. - Accessories may not be original, but will be compatible and fully functional. Product may come in generic box. - This product is eligible for a replacement or refund within 1-Year of receipt if it does not look like new or work as expected.

Color: Silver    Service Provider: Verizon    Product grade: Renewed Premium

- 【10500mAh High Capacity for Continuous Power】 NW-F970U is a 7.27V 10500mAh 76.33Wh USB C replacement battery for NP-F970, compatible with Sony FX3 A7 IV A7S III Canon EOS R5 R5 C R6 Panasonic S5 GH5 Nikon Z8, etc. Supporting PD 45W fast charging and discharging. Recharges in 2.3 hours for maximum efficiency, ideal camera accessories for live streaming, and video recording. Note: Fully charge and discharge the battery once before use to ensure accurate power display - 【Dual Port NP-F Battery with 45W Fast Charging】 Featuring a USB A output (up to 24W) and a bidirectional USB C port (up to 45W), this f970 battery delivers up to 55W when both ports are used together, ideal for powering a camera, monitor, or other gear simultaneously. The USB C port supports bidirectional 45W PD fast charging, enabling rapid device charging and a full battery recharge in just 2.3 hours - 【Upgraded with Smart OLED Touchscreen】 Integrated with a smart OLED touchscreen, the NW-F970U usb c npf battery allows real time, accurate monitoring of the remaining power with a simple tap. Compared with traditional LED indicators, the OLED display offers a clearer and more precise power readout. It also automatically flashes to alert you in case of overload, overcurrent, overvoltage, overheating, and other electrical issues - 【Extensive Device Support】 Featuring a standard NP-F mount, this lithium ion NP-F replacement battery is widely compatible with Sony handycam camcorder and devices that use NPF batteries, including cameras, LED video lights, monitors, follow focus systems, camera sliders, and stabilizers, providing a continuous and reliable backup power supply for prolonged shooting sessions - 【Advanced Multi Protection Safety System】Built with premium battery cells and a sophisticated protection system, the NP-F replacement battery safeguards against overheating, overvoltage, overcurrent, overcharge, overdischarge, overload, electric shock, and short circuits to ensure battery safety.Note: Do not use it to charge external devices while being recharged itself,as doing so may cause overheating and reduce battery lifespan.

Style: NW-F970U (Black)

- 【Stunning 4K UHD & 8x Zoom】 Capture tiny details and record 4K ultra-clear videos day & night with the Anona 4K indoor camera, say goodbye to 2K or 3K. The professional-grade lens and 8X zoom bring distant details into sharp focus, so you never miss some wonderful moments. - 【AI Person/Pet/Crying Detection 】Thanks to the AI algorithms, Anona pet/baby camera is able to detect pets, person, and baby crying. And you will receive a notification from the phone app immediately. Keep track of your loved ones even when you are busy. - 【Ultra-Smooth 360° Pan & 110°x Tilt】Just pan the camera in 360° or tilt it in 110° to see all around.One indoor security camera covers every angle. The auto-tracking feature will detect a moving object, follow it, and record it. - 【Faster Dual-Band Wi-Fi 6 】Anona wifi cameras adopts the latest Wi-Fi 6 for data transmission - much faster and more smooth & stable than Wi-Fi 4. Dual-band Wi-Fi enables you to switch between 2.4 GHz and 5 GHz Wi-Fi for the best signal. - 【Safer Local or Cloud Storage 】Opt to Anona Cloud to save videos on our cloud storage encrypted by AES-128, a highly secure and efficient encryption algorithm. If you prefer local recordings, just insert an up to 512 GB micro SD card (not included) to the indoor cameras for home. 2 storage choices - you decide.

Style: 4-Pack

- DIVERSE COMPATIBILITY: Replacement for Sony models that use battery such as Sony NP-F550 NP-F570 NP-F750 NP-F770 NP- F970 NP-F960, NP-F975, Sony Handycams, Neewer CN160 CN-216 LED Light, Neewer 759 74K 760 Feelworld, Neewer 759 74K 760 Field Monitor - HIGH CAPACITY: 6600mAh rechargeable Li ion with premium cell for longer battery without memory effect. It provides enough powers to the flash light or your shoot equipments when you go out for a trip, helps you to capture the wonderful moment you want to keep. NOTE: For optimal battery longevity, please fully charge the battery before first use - RAPID MICRO USB BATTERY CHARGER: Quick charge with automatic constant current control; It can charge two batteries at the same time because of its sufficient 5V/2A input - INTELLIGENT PROTECTION SYSTEM: Quick charge with automatic constant current control prevents battery from overcharging, over discharge, over-temperature, over current, over voltage, short circuit, and electronic shock - 100% SAFETY GUARANTEE: 1-Year Neewer Warranty and lifetime email support

Style: NW-F970

- 【Integrated USB Type C Port】 Say goodbye to dedicated battery chargers. With a built in USB C charging port, this 3500mAh battery can directly receive power from power adapters and portable chargers via an included USB C cable. NOTE: For optimal battery longevity, please fully charge the battery before first use - 【Faster Full Charging Speed】 This portable lithium ion battery can be fully charged in 2.9 hours with a separately purchased 5V 2A USB wall charger, much faster than 9 hours when using the original battery charger. Note: PD fast charging is not supported. This li ion battery is a camera accessory as a backup power supply for your equipment during outdoor travel photography and videography - 【Advanced Protection System】 The thorough protection system can effectively protect against overcharging, short circuits, overheating, overcurrent, overvoltage, and other hazards - 【Fully Decoded for Safer Use】 This battery is fully decoded. It won't cause a warning alert to pop up on your camera screen and will display the battery status icon like the original batteries - 【Compatible with Various Equipment】 It is a professional camera accessory as a replacement for Sony NP-F series batteries, including NP-F550, NP-F570, NP-F750, NP-F770, NP-F960, NP-F970, NP-F975. Compatible with Sony CCD-RV CCD-SC CCD-TR CCD-TRT CCD-TRV CVX DSR DCR GV HDR HVL HVR MPK MVC PBD PLM series digital DSLR cameras, camcorders, and handycam, NEEWER LED panel lights, ring lights, and field monitors

Style: TNP-F550 3500mAh

- 🎮 【 Perfect Function Stand】Except use for Switch /Switch OLED/Steam Deck/Switch lite, our stand also suitable for tablets and smartphones from 4-13 inches. It can not also help you play games steady, but also watch video, listen to music, and more. - 🎮 【 Multi-angle Adjustable】The stand supports multi-angle display to suit your personal preference & comfort while playing. With the ergonomic design, you can adjust the angle of the screen to 60, 50, 40 or 30 degrees. - 🎮 【 Radiating & Anti-Skid】Promotes adequate ventilation to help prevent Switch from over-heating. Non-skid rubber feet keep it in place. - 🎮 【 Portable & Lightweight】Travel friendly and portable, easy to use and store in any bag; Compact and foldable, it can be easily packed away when not in use. - 🎮 【Intimate Service】We promise to provide the maximum protection for the life of our product, and you can have 7 * 24 hours after-sales service. If the Switch Stand don't meet your need or any other defect, please contact us and customer support team will response you within 12 hours and offer you a satisfied solution.

Color: Green

- 【1200Nit, 6-inch Full HD Screen】High brightness 1200nit is viewable in almost every kind of light. Indoors, outdoors or anywhere you need.Clearly checking and capture every nuanceWith extremely high resolution 6-inch ips panel, provides excellent details,accurately reflect the original colors.allowing filmmakers to accurately monitor their shots in various lighting scenarios - 【Built-in Rechargeable Battery】P6XL built-in 22.2Wh/7.4 battery,Can be charged Type-C charging or rechargeable battery ，for mobile shooting（Note: The voltage of the charger must be 9V; When charging the battery level shows 100% is not means full charged,til the indicator light to turn green that means really full charged） - 【4K@60Hz HDMI In/Output without Delay】The P6XL DSLR monitor equipped with a 4K HDMI input, supports up to 2160p/30p signal, compatible with the latest DSLR cameras on the market. Furthermore, it comes with a built-in 11-language support, making it convenient for international shooting crews with diverse language backgrounds - 【Sharp Screenshot + Image Overlay】P6XL supports screenshot and stored via USB flash driver, you can capture any image, then compared with real-time video by semi-transparent image superposition. It is convenient for photographers to compare the composition and correct the displacement during the shooting. In addition, you can also import custom image (must be JPG image). - 【Accurate Exposure and Focus】HDR Monitoring. Built-in waveform monitoring, you can choose from waveform (RGB Parade, YUV Parade, Y Parade), vector scope, histogram, audio phase and level displays, and get broadcast accurate waveform monitoring that shows everything you need to know technically about your video and audio signals. - 【9:16 vertical screen marker】P6XL has many kinds of ratio marker, especially the vertical screen marker 9:16. Perfect for vertical screen platform such as Tik tok, instagram. Especially the three custom shortcut buttons, the photographer can set the shortcut functions in advance. - 【Package Include】1×P6XL Monitor, 1× A-A HDMI Cable, 1× Micro HDMI Cable, 1×USB-A to USB-C Cable, 1×Mini Hot Shoe Mount+ Hex wrech, 1×USB-A to USB-C Adapter, 1× Sunshade+Frame, 1×Cable Management Tie, ,1×Manual

- All overseas models purchased through official channels – both past sold and current for sale– have not and do not restrict users from installing third-party firmware. Also, there is no plan to restrict the use of third-party firmware on overseas models purchased from official channels. - Pocket-Size Mini eReader for Reading Anywhere: Ultra-light at just 0.23 inch and only 2.72 oz, Xteink X4 is designed for true portability. Slip it into your pocket or bag and enjoy reading anytime. Perfect for commuting, travel, or quick reading breaks throughout the day. - 4.3" Paper-Like E-Ink Display: The 4.3-inch E-Ink screen delivers a natural paper-like reading experience that’s gentle on the eyes. Enjoy clear text and comfortable reading without glare or distractions. - Magnetic-Ready Design for Flexible Use:Includes magnetic stick-on rings for easy attachment to your phone or othersurfaces. For proper adhesion and secure placement, refer to the Installation Manual in the Safety Instructions. - Pure Reading, No Distractions: Enjoy a dedicated reading experience with 16GB storage for thousands of books. Physical page-turn buttons make reading effortless. No subscriptions, no notifications, just focused reading. - Long-Lasting 14-Day Battery Life: Powered by a 650 mAh battery, Xteink X4 can last up to 14 days on a single charge based on typical reading (1–3 hours per day), so you can stay immersed in your books without frequent charging. - Enhanced Durability with Premium Glass Etching: Built with high-aluminosilicate glass for improved strength and clarity, while maintaining a refined viewing experience. Handle with care to protect the inner screen (avoid impact or pressure on the screen).

Color: White

- Compatibility : This kit includes a top handle 3765 and a monitor mount 2905B. The monitor mount 2905B is designed to support 5” and 7” camera monitors via cold shoe on top of camera cages or handles. The top handle with locating holes for ARRI 3765 is designed to facilitate low-angle shot and reduce burdens on arms - Tension Adjustable: The monitor mount offers 180° tilt & 360° swivel. Different with the old version using allen wrench, the tilt tension of this upgraded monitor mount is quickly adjusted via a thumbscrew. The swivel tension is adjusted by provided allen wrench - Anti-Twist Design: The camera monitor holder features bulid-in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting - Multiple Mounting Points: The top handle features 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. Additionally, it has an abundance of 1/4"-20 and 3/8"-16 mounting points for other accessories. An allen wrench helps tighten the locking screw, making it easy to assemble and disassemble - Note: Different tilt angle has different load capcaity, 90° load capacity＜4.2kg; 45° tilt load capacity＜2.5kg, 30° tilt load capacity＜2.3kg. For the safety, please do use the Allen Wrench to re-tighten the 1/4'' knurled screw for further security