486 products in DIY

- Tungsten carbide-tipped cutting edges last longer and can be run at higher rates and speeds, cutting diameter is 38mm(1-1/2"), effective depth is 25mm(1”). - Well made of high speed steel, with extremely sharp blade, low consumption and durable, provided impact resistance, wear resistance. - Edge coated with diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut without broken. - Integrated design: including drill bit, spring, hex wrench. Split point pilot drill bit prevents the bit from walking. - Fast and precise cutting for stainless steel, sheet metal, fiberglass and wood.

- SELF-ADJUSTING: Strip wire from 10 to 24 AWG with our self-adjusting mechanism. Jaw Width: 2 inches - ADJUSTABLE STOPPER: Control the length of the core strip with the built-in adjustable stopper - CRIMPING: Crimp 10-22 AWG insulated, 10-22 AWG non-insulated, and 7-9mm ignition terminals - STRIPPING: Strip wire from 10-24 AWG while swivel knob micro-adjusts to strip gauges smaller than 20 AWG - LIFETIME GUARANTEE: Each IRWIN hand tool is warranted to be free from defects in material and workmanship for the life of the tool - Wire stripper with self-adjusting mechanism to strip wire from 10-24 AWG while swivel knob micro-adjusts to strip gauges smaller than 20 AWG - Adjustable stopper controls the length of the core strip - Wire crimper crimps 10-22 AWG insulated, 10-22 AWG non-insulated and 7-9mm ignition terminals while wire cutter extends versatility - ProTouch grips provide maximum comfort and reduced hand fatigue - Backed by the IRWIN Lifetime Guarantee

- DEWALT-built high power, high efficiency brushless motor of DEWALT 20V hammer drill delivers up to 75% more runtime vs. 18V NiCad brushed motors - The cordless hammer drill features heavy-duty 1/2-inch ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength - 3-Mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model - LED Spotlight Mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces

No description available.

- 【Model】Red Nylon Tube - 【Size】1/4''OD（6.35mm）,1/6''ID（4.25mm） - 【Pressure】Burst Pressure 913Psi;Working Pressure 362Psi. - 【Working Temperature:】-22°F - 248°F - 【Length】10M/32.8FT

Size: 1/4" OD 32.8 FT    Color: Red

- 【Model】Blue Nylon Tube - 【Size】3/8''OD（9.525mm）1/4''ID（6.35mm） - 【Pressure】Burst Pressure 913Psi;Working Pressure 362Psi. - 【Working Temperature:】-22°F - 248°F - 【Length】10M/32.8FT

Size: 3/8"OD 32.8FT    Color: Blue

- Precision Screwdrivers feature rotating caps for optimum and precise control - Color coded rings for easy spotting of each tip type - Over-sized cap markings for quick identification of tip size - Cushion-Grip handles for maximum comfort when working on small equipment - Heat treated and precision-machined tip for greater strength - Set contains Phillips #0, #00 tip (Cat. Nos. 6222, 6233) and Slotted tip 3/32-Inch (2.5 mm), 1/8-Inch (3 mm) (Cat Nos. 6243, 6254) screwdrivers - Compatible with terminal blocks, electronics, small home appliances, and more

Style: 4-Piece Fixed Blade

- Designed to Resist Aging, Compression Set, Water & Oil - Features Alternate Rib Height for Additional Vibration Isolation Under Both High and Low Weight Loads - 7/8" Thick - Size: 6" x 6"

Size: 6" X 6" X 7/8"

- INCLUDES: 4 in. Dust Collection Hose, left spiral. - ULTRA-FLEX: Hose offers superb flexibility for maneuvering around your workshop and machinery. - PREMIUM BUILD: Offering high flexural strength, durability and chemical/moisture resistance. Features an all-black construction and is made out of polypropylene. - Compatibility: Due to manufacturing constraints, not all 4” nominal fittings have the same tolerances. The hose works well with Powertec 70193, Screw End Quick Connector, and fits all 4” nominal fitting with an actual OD of 3.916”, or less. To assure that the hose will work with your fitting, check the actual OD - APPLICATION: Ingenuous segmented design means it will maintain desired rigidity when dust collecting in hard to reach areas, thus maintaining optimal air flow to your dust collector. An expandable dust collection hose that extends up to 36 inches (3ft), and possesses the ability to bend, twist, and snake into a variety of positions for optimal project versatility.

Color: 4'' x 36'' PP Black Hose

- Includes: (1) 5" diameter 10 feet long left spiral clear flexible hose, (5) 5” Key Type Hose Clamps - Made from high quality PVC for durability, strength and easy installation - Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability - Perfect for any clear view dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration - Ideal for woodworking dust collection systems, centralized vacuum setups, and shop ventilation ducting. ⚠️ Not recommended for leaf and lawn vacuum systems, outdoor use, or high-temperature applications such as dryer vents, portable AC vent, furnace exhaust, or heated air ducting - APPLICATION: Allows you to secure your ductwork hoses and connect dust collection hoses to dust hoods, connectors, 5 inch blast gates, and other dust collection fittings - EASY TURN: Hose clamp allows you to simply use the thumb screw clamp to quickly loosen or tighten it without the use of tools - QUALITY: Delivers a heavy duty, leak proof and corrosion resistant hose clamping tool constructed out of premium grade stainless steel - VERSATILITY: Can be used indoor and outdoor for a wide assortment of home, automotive, and DIY woodworking applications – such as securing a dryer vent hose, duct work, piping, tubes, large cables and more

Style: 5" x 10' PVC Hose + 5 Clamps

- INCLUDES: (1) 4 Inch Quick Connect Dust Collection Tool Adapter, (1) 4 in. x 20 ft. left spiral transparent dust collector hose and (2) thumb screw 4 in. key hose clamps - FUNCTION: Allows you to quickly and easily change the tool you are using on your dust collection system, by providing you with a way to connect the tools dust port outlet. Disconnecting and moving or switching from machine to machine is made easier - VERSATILE: Our 4" Dust Port Adapter can be attached, using a hose clamp (not included), to a 4" ID dust collection hose and it can be used with connection ports that range in size from 1-3/4” OD to 2-1/2" OD - PREMIUM DESIGN: This dust collection coupler is useful for 4" ID hoses to connect the tools dust port outlet. The flange is very elastic and it seals well around tool ports ranging from 1-3/4" OD to 2-1/2" OD. The adapter body is made of heavy duty plastic for long-term durability - EASY TO USE: With the adapter connected to a 4” ID hose onto a 4 inch dust collector port, simply attach the adapter to your tool's dust port - providing a secure seal and leak free connection - FUNCTION: A practical, safe and cost effective dust collection hose and clamp collection - designed to enhance your existing workshop dust collection and filtration systems - FLEXIBLE PVC HOSE: Is reinforced with spring steel wire, puncture resistant, while delivering optimal maneuverability and toughness

Style: 4" x 20' Hose + 2 Clamp + Adapter

- SAE & Metric Socket Set Comes with Lockable Stacking Cases - Socket Set Has Durable Transparent Lid - Removable Internal Tray is Available with the Mechanic Socket Set - 72 Tooth Ratchet - Full Life Time Warranty - Exceeds ANSI Specifications