463 products in DIY

- Tungsten carbide-tipped cutting edges last longer and can be run at higher rates and speeds, cutting diameter is 17.5mm(11/16"), effective depth is 25mm(1”). - Well made of high speed steel, with extremely sharp blade, low consumption and durable, provided impact resistance, wear resistance. - Edge coated with diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut without broken. - Integrated design including drill bit, spring, hex wrench. Split point pilot drill bit prevents the bit from walking. - Fast and precise cutting for stainless steel, sheet metal, fiberglass and wood.

- IRWIN 2078300 8-inch wire stripper features 2-inch jaw width with capacity for 10 to 24 AWG with self-adjusting mechanism - Crimp 10-22 AWG insulated, 10-22 AWG non-insulated, and 7-9mm ignition terminals - Strip wire from 10-24 AWG while swivel knob micro-adjusts to strip gauges smaller than 20 AWG - IRWIN 2078309 wire cutter with induction hardened cutting edge strips and cuts 10-22 AWG - IRWIN 2078306 cutting pliers feature nickel chromium steel construction - Cutting pliers have machined jaws for maximum gripping strength

- Includes (2) 20-Inch x 6-Inch x 16-Inch Akro-Mils plastic storage cabinets with 24 drawers each for organizing hardware, craft supplies, office supplies, and more. - High-impact polystyrene plastic construction; Drawers feature finger grip pulls and rear stop tabs. - Stackable design with secure locking tabs; Wall mountable using built-in keyhole slots. - Large drawer dimensions - 6 x 4.5 x 2.25 Inches; Small drawer dimensions - 5.25 x 1.75 x 1.5 Inches.

Style: 24 Drawer    Pattern Name: Cabinet + Cabinet, Black    Color: Black

No description available.

Size: 155mm / 6.1"

- Cuts Up To 18 Ga. Material Including But Not Limited To - Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber - 360 degree swivel head allows for maneuverability when cutting - 1/4 in. hex shank - Works with most 18V-20V impact driver and drill tool brands - Includes: (1) 18ga Shear Attachment

- VERSATILE 11-IN-1 TOOL: Includes 7 tips and converts to 4 nut driver sizes for a wide range of applications - INTERCHANGEABLE COMPONENTS: Fast and easy switch outs with interchangeable bits and nut drivers - COMFORTABLE CUSHION-GRIP HANDLE: Provides a comfortable grip for enhanced control and torque - INCLUDED BITS: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess - BLAST FINISH BIT: Tips provide a firm hold and reduce cam-out - REPLACEMENT BITS: Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX)

Style: 11-in-1

No description available.

Size: 180mm / 7.1"

No description available.

Size: 190mm / 7.5"

- Rechargeable 7.2V lithium ion battery allows for cordless operation - Versatile tool cuts, sands, polishes, drills, carves, etches, deburrs and more - Variable speed dial allows for operation from 5,000 to 25,000 RPM in increments of 5,000 RPM - Lightweight design weighs in at a mere 0.6 pounds to limit fatigue during operation - Includes 24 accessories, onboard LED lights, a charger, and a compact carrying case

- ⚙️【Solid and Sturdy】 The black hole saws are much solider and sturdier than the red one, they are premium hole cutters for installing recessed lights into ceiling, for punching a big hole at wall to fit a vent pipe or an extract fan, also for cable installation and soft metal cutting. - ⚙️【Sharp and Durable】 The cutting teeth is double layered with high speed steel, obviously thicker and heavier than the red hole saw. Strong and solid body, sharp and durable teeth, easy to punch a clean hole. - ⚙️【Accurate Cutting】 The increased hardness(70-80HRC) of the M42 bi-Metal and the optimized tooth geometry allow our hole saws to provide faster and more accurate cutting diameter than standard hole saws, the errors of the cut size are less than one millimeter. - ⚙️【Chips Remove】 The embed slug holes around the saw body are designed for removing the wood and metal chips while cutting. They are also good for reducing friction heat and improve the efficiency, due to the fact that less of total amount of material is actually cut. - ⚙️【60 Days Refundable】If you had any problem with the paket you have received, for example, miss parts, or just not satisfied with our products, please contact us via e-mail, all our products are refundable for 60 days.

Color: Frosted Black   

- 【Package Includes】- You will get a battery cable wire lug crimping tool, a cable cutter, 340pcs copper ring terminal block, 420pcs heat shrinkable tube, the size and quantity are complete to meet your various needs. - 【Rotary Crimping Mold】- Professional cable terminal crimping tools are 6mm²/10mm²/16mm²/25mm²/35mm²/50mm² (similar to AWG 10, 8, 5, 3, 2, 1). It uses high-precision jaws to ensure a tight connection after crimping. - 【High-quality Material】- All ring terminals are made of electrolytic grade copper to achieve maximum conductivity. The heat-shrinkable tube is made of high-quality polyethylene material, which is thick and durable. - 【Ergonomic Design】- The handle of the crimping device is up to 11" long and is wrapped with soft rubber. The ergonomic lever structure design can increase friction and make you more labor-saving when crimping. - 【Wide Application】- These lugs are very suitable for distribution boxes, ships, golf carts, solar panels, household applications, etc. It is also widely used in vehicles, motorcycles, boats, and DIY wires.

Model: 2pcs Crimpers Tools+760 Accessories

- Manufactured from Heavy-duty Chrome-Vanadium steel alloy (50BV30) with corrosion-resistant mirror chrome finish. - 1/4" Drive universal flex socket set include: (Metric)5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15mm - 6-point opening grips flat sides of fasteners, not corners, preventing round-off - The set can gain access to fasteners hard to reach and changing angle of force - Meets or exceeds ANSI performance standards. It comes with 1 year quality warranty.

Size: 1/4"Dr. Metric