481 products in DIY

- Manufactured from Heavy-duty Chrome-Vanadium steel alloy (50BV30) with corrosion-resistant mirror chrome finish. - 1/4" Drive universal flex socket set include: (Metric)5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15mm - 6-point opening grips flat sides of fasteners, not corners, preventing round-off - The set can gain access to fasteners hard to reach and changing angle of force - Meets or exceeds ANSI performance standards. It comes with 1 year quality warranty.

Size: 1/4"Dr. Metric

- Nut Drivers' full hollow shaft designed with Rare-Earth magnetic tips facilitate work on long bolt applications - Tool Set contains Nut Driver Cat. Nos.: 630-3/16M, 630-1/4M, 630-5/16M, 630-11/32M, 630-3/8M, 630-7/16M, 630-1/2M - Cushion-Grip handles allow for greater torque and comfort and internal flanges provide solid, twist-resistant shaft anchor - Tip-Ident quickly identifies nut driver hex orientation and size by color coding the handle ends so you can easily engage the nut driver with the fastener - Made in USA - 3/16-Inch does not have hollow shaft

Style: Magnetic

- 【Premium CR-MO】Manufactured from premium impact grade chrome molybdenum steel construction with corrosion-resistant black phosphate finish for durability. - 【Set Include】 Male: 3/16", 1/4", 9/32", 5/16", 11/32", 3/8"; Female: 1/4", 9/32", 5/16", 11/32", 3/8" - 【Application】Tapered Male Square Drive and Chamfered Female Square Drive, aligns socket to fastener quickly, Low profile design, can easy to access tight spaces, fit any 3/8" drive ratchets / bars etc. - 【Laser etche】Large, high-contrast size marking is permanently laser etched and easy to read, even in low light. - 【Service Guarantee】All MIXPOWER Tools meet or exceeds ANSI performance standards. It comes with 1 year quality warranty.

- ⚙️【HOLE CUTTER】The HSS hole saws are perfect cutting tools for installing recessed lights into ceiling, for punching a big hole at wall to fit a vent pipe or an extract fan, and also for cable installation. - ⚙️【SHARP TEETH】The bi-metallic cutting teeth is layered with high speed steel, that increases their hardness and durability, and gives the hole saw excellent cutting ability to punch a clean hole. - ⚙️【ACCURATE CUTTING】 The increased hardness of the carbide technology and optimized tooth geometry allow our hole saws to provide faster and accurate cutting than standard hole saws, the diameter errors of the cut holes are less than a millimeter. - ⚙️【MORE EFFICIENCY】 Each hole saw is designed with slug holes, which can remove the wood chips while cutting, reduce friction heat and improve the efficiency. Due to the fact that less of total amount of material is actually cut, much less power is required, longer battery life of power tools is benefited. - ⚙️【60 DAYS REFUNDABLE】If you are not satisfied with the hole saws, or have probelms with missing parts of the package you’ve received, please contact us via e-mail, we will reply you in 6 hours, and we promise that all our products are refundable for 60 days.

Color: Red   

No description available.

- Rechargeable 7.2V lithium ion battery allows for cordless operation - Versatile tool cuts, sands, polishes, drills, carves, etches, deburrs and more - Variable speed dial allows for operation from 5,000 to 25,000 RPM in increments of 5,000 RPM - Lightweight design weighs in at a mere 0.6 pounds to limit fatigue during operation - Includes 24 accessories, onboard LED lights, a charger, and a compact carrying case

- Includes 190-piece accessory kit with steady-grip handle for comfort and precision along with flex shaft for intricate detail work (WEN 23190). - Powerful 1.3A variable speed motor goes anywhere from 8,000 to 35,000 RPM (WEN 23190). - Features additional 327 accessories for sanding, carving, cutting and more (WEN 230327A). - Compatible with WEN rotary tools as well as other brands accepting 1/8-inch shanks (WEN 230327A). - Includes carrying cases for both accessory kits for storage and organization.

- Brighten work areas - with an integrated 3-led work light for enhanced visibility in low-light areas - Brushless motor on DEWALT impact driver delivers 1825 in-lbs of torque and 3400 RPM to drive large diameter screws - Complete Tough Fastening Applications - On the jobsite with 30% more torque** - Pro-Level Control - And precision with variable speed trigger and 3-speed setting. Includes belt hook - 3 Year Limited Warranty

Style: NEW - 20V MAX XR Impact Driver Bare Tool

- 6 INTEGRATED HEX SIZES plus 1/4-Inch deep bit holding feature - IMPACT RATED SHAFT AND SOCKETS can also be used with an impact driver - HEX DRIVER SIZES include 1/4-Inch, 5/16-Inch, 11/32-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch - MULTI-FUNCTION 1/4-Inch SOCKET has both shallow (driver) and deep (bit holder) positions

- INCLUDES: (1) 4 inch x 20 ft. left spiral transparent dust collector hose and (2) thumb screw 4 inch key hose clamps - FUNCTION: Practical, safe and cost-effective dust collection hose and clamp - designed to enhance your existing workshop dust collection and filtration system - FLEXIBLE: PVC HOSE is reinforced with spring steel wire, puncture resistant, while delivering optimal maneuverability and toughness - HOSE CLAMPS: Made of stainless steel for rust resistance and features a thumb screw design that allows you to quickly loosen or tighten clamps around flexible hoses (or items) without using tools - VERSATALITIY: Works with a wide variety of major brand dust collection systems, indoor ventilation and dryer ventilation arrangements, along with many common piping, ductwork and woodworking applications

Color: 4'' x 20' PVC Hose+2 Clamps

- Includes (1) 4" diameter 20 feet long left spiral clear flexible hose (1) 4” to 2 1/2” Dust Collection Hose Reducer - FUNCTION: A handy double sided adapter that allows you to step down from your larger (4”) dust collection hose to a smaller (2-1/2) shop vacuum hose branch line. The 2-1/2 in. opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners - PLEASE NOTE: This cone reducer is specifically designed to work exclusively with 4” and 2-1/2” hoses | It is NOT intended to fit or accommodate a 2-1/2” OD or 4” OD dust collection equipment port directly (which would require POWERTEC 70149 or 70148 Flex Cuffs) - PREMIUM: Made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection - DIMENSIONS: 4” nominal OD end measures 3-61/64” OD and 3-41/64” ID; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID - Made from high quality PVC for durability, strength and easy installation - Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability - Perfect for any clear view dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration - Ideal for an assortment of sawdust collectors, air conditioning indoor ventilation ducts and 4” PVC dust collection systems for woodworking applications

Style: 4" x 20' PVC Hose + Reducer

- Includes (one) 6" diameter 10 feet long left spiral clear flexible hose - Made from high quality PVC for durability, strength and easy installation - Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability - Perfect for any clear view dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration - Ideal for woodworking dust collection systems, centralized vacuum setups, and shop ventilation ducting. ⚠️ Not recommended for leaf and lawn vacuum systems, outdoor use, or high-temperature applications such as dryer vents, portable AC vent, furnace exhaust, or heated air ducting

Style: 6" x 10' Hose