36476 products in All Categories

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: ツヤ消しこげ茶    Size: 1/12L

- With the incorporation of a special rust inhibitor, it can be applied directly over rust without removing it - Strong adhesion, can be applied to materials such as Galvalume steel sheets, aluminum, and stainless steel - Utilizes silicone acrylic resin for excellent weather resistance - No need for rust remover or rust-stopping paint, significantly reducing the time required for painting - Uses: (Indoor/Outdoor classification: For both indoor and outdoor use) Doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products, galvalume steel plate sidings, corrugated metal, aluminum building materials, stainless steel products - (Standard) Number of coats: 1 coat - Specifications: Coating Area: 0.2 gallons (0.7 L) / 64.6 - 86.1 sq ft (6 - 8 m{^>2 - Drying time: Summer: 1.5 - 2 hours, Winter: 5 - 6 hours

Color: blue, (sky)    Size: 0.7L

- Formulated with a special anti-rust agent, it can be applied directly over rust without dropping rust - Strong adhesion, can be applied to materials such as Galvalume steel sheets, aluminum, and stainless steel - Utilizes silicone acrylic resin, providing excellent weather resistance - No rust remover or rust-stopping paint is required, significantly reducing the time needed for painting - Applications: (Indoor/Outdoor classification: For both indoor and outdoor use) Doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products, galvalume steel plate sidings, corrugated metal, aluminum building materials, stainless steel products - (Standard) Number of coats: 1 coat - Standard Coverage Area: 0.2 gallons (0.7 L) / 65.6 - 86.1 square feet (6 - 8 square meters or 3.6 - 4.5 tatami mats) - Drying time: Summer: 1.5 - 2 hours, Winter: 5 - 6 hours

Color: ツヤ消し白    Size: 0.7L

- Packaging Type: Cartridge - Characteristics: Modified silicone resin type - Standard usage amount (application amount): 12~13 m/per tube (5×5 mm joint) - Suitable for healthy homes, paintable, good adhesion, elasticity, water resistance, heat resistance, cold resistance, weather resistance, low temperature workability - General building interior and exterior joints

Color: gray   

- The sound of your smartphone is transformed Experience high-quality sound and deep bass expansion, anytime, anywhere - ・Equipped with X Balanced Speaker Unit - Equipped with Sony's proprietary algorithm mono mode that spreads sound even when placed vertically - Equipped with Extra Bass mode that produces deep bass - Made of fabric material, dustproof, waterproof (IP67), and rust-proof - Accessories: USB Type C Cable, Strap

Color: Black    Style: SRS-XB23    Pattern: Single Item

The angle can be adjusted arbitrarily. It can be fixed at the angle set with the stop screws

Size: 25cm

- Outer Diameter: 3.0 inches (75 mm), Screw Diameter: M10 x P1.5 - Maximum Rotational Speed: 12,000 per minute - Applicable models: Disc grinder - Wire: Brass plated on hard steel wire

- Your smartphone's sound is transformed Spread high quality sound and deep bass anytime, anywhere - ・Equipped with X Balanced Speaker Unit - ・Equipped with Sony's proprietary algorithm mono mode that spreads sound even when placed vertically - Equipped with Extra Bass mode that produces deep bass - Made of fabric material, dustproof, waterproof (IP67), and rust-proof

Color: blue    Style: SRS-XB23    Pattern: Single Item

■ For secure connection of wiring cords ■Easy to put on and take off ■ Comes with a sleeve for reliable insulation and splash-proof effect. From April 1, 2024, the name of the company was changed from Amon Industries to Amon. The packaging and instruction manual (English language not guaranteed) may be changed at any time. Please note that the company name may be mixed depending on when it arrives

Pattern Name: 2-Single Item    Style: Set of 12

- A wide range of styles can be easily enjoyed

Style: Airwrap - sakura

Lightweight, well-balanced and easy to climb down. 17.6 oz (500 g) lighter than the previous (CG36DB) for easy work. Rearward motor placement With a good center of gravity balance, it achieves a feeling of operation similar to an engine weed trimmer. The lightness and well-balanced, achieves a center of gravity that feels close to that of conventional products. Shakes easily without shaking your core. Specifications: Operation Handle: Two-handed handle Motor: DC motor Cutting blade: Chip saw outer diameter 9.1 inches (230 mm) x inner diameter 1.0 inches (25.4 mm) x number of blades: Mounting screw diameter: Left M10 Product dimensions (total length x total height x total width): 70.9 x 24.4 x 15.9 inches (1,800 x 620 x 403 mm) (with battery installed) No-load rotational speed: [Eco] 4,300 rpm, [Standard] 4,900 rpm, [Power] 5,600 rpm. Weight: 8.4 lbs (3.6 kg) Compatible Storage Batteries: Lithium Ion battery 18 V (BSL18XX series), multi-bolt type battery Standard Accessories: Chip saw, cutting blade cover, hex wrench, box wrench (0.7 x 0.7 inches (17 x 19 mm), protective glasses, shoulder strap, tool bag, battery cover

Style: Two hand handles    Pattern Name: Battery and charger sold separately

- 𝐔𝐋𝐓𝐈𝐌𝐀𝐓𝐄 𝐓𝐈𝐌𝐄-𝐒𝐀𝐕𝐈𝐍𝐆 & 𝐂𝐋𝐄𝐀𝐍𝐈𝐍𝐆 𝐒𝐎𝐋𝐔𝐓𝐈𝐎𝐍: Automatically washes, sterilizes, and dries baby bottles, pump parts, baby tableware, and more, saving you precious time to spend with your family. - 𝟐𝟔 𝐏𝐎𝐖𝐄𝐑𝐅𝐔𝐋 𝐒𝐏𝐑𝐀𝐘 𝐉𝐄𝐓𝐒 𝐅𝐎𝐑 𝐓𝐇𝐎𝐑𝐎𝐔𝐆𝐇 𝐂𝐋𝐄𝐀𝐍𝐈𝐍𝐆: No single stained spot will be missed, as 12 directional spray jets in 4 sets brush the interior of each bottle, while 10 swirling spray jets cleanse the surface. - 𝐖𝐄𝐀𝐑𝐀𝗕𝐋𝐄 𝐏𝐔𝐌𝐏 𝐏𝐀𝐑𝐓 𝐒𝐀𝐅𝐄: Pop in your baby bottles, as well as your wearable pump parts. Momcozy bottle washer has a dual-layer design that holds up to 4 bottles from most major brands and other baby items at a time. - 𝟵 𝐂𝐋𝐄𝐀𝐍𝐈𝐍𝐆 𝐌𝐎𝐃𝐄𝐒 𝐂𝐎𝐌𝗕𝐈𝐍𝐀𝐓𝐈𝐎𝐍 𝐓𝐎 𝐂𝐇𝐎𝐎𝐒𝐄 𝐅𝐑𝐎𝐌: Freely combine the four modes (Rapid Wash, Normal Wash, Sterilize+Dry, Storage) and customize your settings. In a rush? Opt for the Quick Wash mode, which efficiently cleans your bottles in just 19 minutes. - 𝐄𝐅𝐅𝐄𝐂𝐓𝐈𝐕𝐄 𝐒𝐓𝐄𝐀𝐌 𝐒𝐓𝐄𝐑𝐈𝐋𝐈𝗭𝐈𝐍𝐆: Creates a safe and hygienic feeding environment for your baby’s health. - 𝐒𝐓𝐄𝐑𝐈𝐋𝐄 𝐀𝐍𝐃 𝐎𝐑𝐃𝐄𝐑𝐋𝐄𝐒𝐒 𝐒𝐓𝐎𝐑𝐀𝗚𝗘: Keep bottles dry and clean in the washer for up to 72 hours after washing. The airflow is purified by the medical-grade H13 HEPA filter, removing 99.9% airborne particles. - 𝐒𝐄𝐂𝐔𝐑𝐄 & 𝐆𝐔𝐀𝐑𝐀𝐍𝐓𝐄𝐄𝐃：Each baby bottle washer comes with a 1-year warranty and includes 60 official Momcozy bottle washer tablets. 𝐍𝐎𝐓𝐄: Compatible with 120V 60Hz voltage.