41306 products in All Categories

- High-Quality Floor Cable Protectors, made from flexible pvc, supplied coiled - uncoils to lay flat (no need to add to boiling water to uncoil). Can be easily cut to size if shorter wire cover lengths are required, cut using sharp utility knife or heavy duty scissors. - Use D-Line Floor Cord Covers to protect trailing cords and address a cable-trip hazard. Popular for use in offices, warehouses, events, exhibitions, classrooms, gymnasiums, retail, hospitality, gaming set-ups or anywhere trailing wires need to be covered. - D-Line Floor Cable Cover profile can be used to protect up to 2x 0.31" diameter cables. - All D-Line Floor Cable Protectors have a ribbed non-slip base & pre-split rear for ease of use... no need to apply adhesive tapes to secure to floor. - D-Line Beige Floor Cable Cover Dimensions: 2.4" (W) x 0.44" (H) x 6ft Length - Inner Channel = 0.63" (W) x 0.31" (H)

Color: Beige

- [UPGRADED SPECTRUM ANALYZER] AURSINC Tinysa Ultra+ ZS406 installed with NEW HW V0.4.6, with 4.0 inch 480*320 touchscreen display, 100kHz to 5.4GHz widely measure range. Built-in 32GB micro SD card, solving the on-site data storage issue, convenient for data sharing and storage. Built-in 5000mAh battery, a fully-charged battery allows for at least 3 hours of operation, without frequent recharging interruptions - [WIDELY FREQUENCY RANGE] The Tiny sa ULTRA+ has an ultra measuring frequency range of 100kHz to 5.4GHz, spectrum analyzer for 100kHz-900MHz and Ultra mode up to 6GHz. Switchable resolution bandpass filters from 200Hz to 850kHz, you could fast and accurate execute measurement tests. Color display showing max 450 points providing gapless covering up to the full frequency range - [2 IN 1 DEVICE] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 100kHZ-900MHz, UHF square wave output between 800mHz-4.4GHz, Mixing signal output is between 4.4GHz-5.4GHz. Built-in calibration signal generator that is used for automatic self test and low input calibration - [200Hz-850kHz RBW] RBW frequency from 200hz to 850khz which can be set to match the measurement requirements, meet SBB two-tone test requirements and fast scanning. The RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test. Input Step attenuator from 0dB to 31dB (can not be used not in combination with LNA) - [EXCELLENCE PHASE NOISE] Phase noise at 30MHz of -108dB/Hz at 100kHz offset and -115dB/Hz at 1MHz offset, DANL -166dBm/Hz. In the level menu, there is the LNA, which will provide 20db of extra gain if you have very low level signal (the LNA in tinySA ULTRA is only effective below 3.5GHz) The default maximum frequency is 800mhz, so you no longer have to switch between low and high range, and can monitor the complete range in one sweep - [PC CONTROL] This tinysa ultra can connect to a PC via USB, Tinysa-APP directly transfers data to the computer. The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel - [WHAT YOU GET] 1x Tinysa ULTRA Spectrum Analyzer (built-in 5000mah rechargeable battery); 1x 32GB Micro SD card (plugged in the host); 2x 30cm ALSR100 SMA cables; 1 x USB Type-C data cable; 1x SMA-SMA barrel connector; 1x TLanyard and touch plectrum; 1x Antenna with SMA connector; 1x stylus pen

No description available.

- 【SUNLU PLA 3D Printer Filament】- SUNLU PLA filament is reliable, versatile, and easy to use. No clogs, bubbles, or tangles, its excellent layer adhesion ensures high-quality prints every time. - 【Neatly Wound 3D Filament Spool】- SUNLU's self-developed neat winding device ensures that the filament is easy to use, with a 100% neat rate that reduces the risk of tangles and jams, and provides a smoother and more efficient 3D printing experience. - 【Clog-Free & Bubble-Free】- Designed and manufactured with superb layer bonding and great fluidity for smooth and stable extrusion. - 【PLA Filament 1.75 mm】- SUNLU PLA filament consistent diameter tolerance 1.75mm ±0.02mm, Tight tolerances make PLA filament smoother and more consistent when printing. - 【Easy to Use】- SUNLU PLA filament is reliable and user-friendly, making the printing process smooth and effortless for both beginners and experts - 【Filament Spool Diameter】- PLA 1KG Spool Diameter: 195mm, Spool Width: 59mm, Spool Hub Hole Diameter: 63mm. Compatible with 99% of 3D printers. - 【PLA Recommend Settings】- To achieve the best printing results with SUNLU PLA filament, we recommend printing at a nozzle temperature of 200-230°C, a bed temperature of 50-65°C, and a printing speed of 50-100mm/s. - 【Wide Compatibility】- SUNLU PLA filament has a diameter accuracy of +/-0.02 mm, small diameter error, wide compatibility, and can be used on various common 3D printers. - 【Vacuum Packaging】- SUNLU 3D Printer Filaments are sealed in airtight vacuum packaging which ensures that they remain moisture-free and preserve their quality from the factory to your 3D printer. - 【SUNLU Main 3D Products】- SUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.

Color: 1000g-pla Bone White    Size: 1 kg

- ①【SUNLU PLA 3D Printer Filament】PLA material is the perfect choice for 3D printing enthusiasts! SUNLU PLA filament is reliable, versatile, and easy to use. No clogs, bubbles, or tangles, its excellent layer adhesion ensures high-quality prints every time. Ideal for beginners and experienced users. - ②【Neatly Wound 3D Filament Spool】SUNLU's self-developed neat winding device ensures that the filament is easy to use, with a 100% neat rate that reduces the risk of tangles and jams, and provides a smoother and more efficient 3D printing experience. - ③【PLA Filament 1.75 mm】SUNLU 3D printer filament dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers. - ④【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers. - ⑤【PLA Recommend Settings】To achieve the best printing results with SUNLU PLA filament, we recommend printing at a nozzle temperature of 200-230°C, a bed temperature of 50-65°C, and a printing speed of 50-100mm/s. - ⑥【SUNLU Main 3D Products】SUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.

Color: 1kg Pla Beige Skin    Size: 1KG

- 【Smooth Matte Finish】- SUNLU MATTE PLA produce a beautiful matte, low gloss and smooth finish, achieving a frosted texture that conceals layer lines. - 【Wound Neatly 3D Filament】- SUNLU R&D team has mastered advanced technology and produced Neatly Wound 3D Printer Filament. No knot, no winding, improve printing efficiency. - 【Dimensional Accuracy & Consistency】- PLA MATTE Filament Dimensional Accuracy +/- 0.02mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing. - 【NO Clogging & NO Bubble】- SUNLU PLA Filament is manufactured in dry and dust-free environment and pack with vaccuumed sealed package, away from any dampness or air, no clogging and bubbling problems. - 【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers. - 【Recommend Settings】- We recommend printing nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s.

Color: 4kg Grey+grey+grey+grey    Size: 4KG

No description available.

Color: Brown

No description available.

No description available.

Color: Handheld Console, Mens   

No description available.

Color: Rubik's Cubes, Mens   

No description available.

No description available.