35013 products in All Categories

- 【Product Name】Tee Shape Push-to Connect Fittings - 【Material】Plastic and Copper - 【Size】3/8" Tube OD x 1/4" NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter - 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F - 【Features】√ Freely change pipeline direction after installation √ Easy to insert or pull trachea manually without tools

Size: 3/8"OD x 1/4"MNPT    Number of Items: 2

- Relief pressure preset to 125 psi with flow rate of 116 cfm - 1/4" male NPT threaded inlet connection - Brass construction and stainless steel spring for corrosion resistance - 250 degrees F maximum temperature for use in high temperature applications - ASME safety rated with UV and NB marks

- WATER&FOOD USE: The Tubing is made from safe,non-toxic materials, It is NSF Certified; Blue RO Tubing is commonly used to distinguish filtered water from raw source water. On most reverse osmosis systems the blue tubing will start immediately after the membrane - SIZE &COMPATIBLE WITH: Outside diameter 1/4 quarter inch 6.5mm, Inside diameter 0.142 inch 4.15mm, inside/outside wall thickness 1.46mm; Compatible with all quick connect fittings we sell or others' that utilize 1/4" Polyethylene Tubing. The 1/4" Measurement is the outside diameter of the tubing and will work with all Push-Connect fittings - FUNCTION&QUALITY: Use with Reverse Osmosis Systems, Drinking Water Filters, Liquid Dispensers,Coffee Machine,Ice Maker, Refrigerators and many other application requiring connections for transfer of water and liquids. It offers prime pressure and temperature ratings and has outstanding resistance to environmental stress cracking. it has been put through rigorous structural and material testing to help ensure they meet the standards for all applications. - NOTE:Please use tube cutter cut the PE tube,veriffy that the end of the tube has been cut squarely,tube cutter with quality blade is suitable for cutting plastic tubings.Please Search (ASIN: B06WD5Z8WK) to buy.

Color: Red    Size: 1/4" OD, 32.8Ft(10m)

- 【Product Name】Tee Shape Push-to Connect Fittings - 【Material】Plastic and Copper - 【Size】1/4" Tube OD x 3/8" NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter - 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F - 【Features】√ Freely change pipeline direction after installation √ Easy to insert or pull trachea manually without tools

Size: 1/4"OD x 3/8"MNPT    Number of Items: 2

- 【Product Name】Tee Shape Push-to Connect Fittings - 【Material】Plastic and Copper - 【Size】3/8" Tube OD x 1/4" NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter - 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F - 【Features】√ Freely change pipeline direction after installation √ Easy to insert or pull trachea manually without tools

Size: 3/8"OD x 1/4"FNPT    Number of Items: 10

- NPT SPEC/SIZE CHECK: NPT1/2-14 Male x NPT3/4-14 Female Brass Pipe Fitting Adapter, can be used in wet environments. The NPT (National (American) Pipe Thread) size is the American standard 60 degree taper pipe thread, is NOT equal to joint diameter size measured by common tools like ruler, tape measure or vernier caliper. Please find the correct size comparison information on the detailed page before purchasing! - THREADS: 1/2 NPT Male (OD approx 0.81" - 0.84", 14 Threads Per Inch) x 3/4 NPT Female threads (ID approx 0.96" - 1", 14 Threads Per Inch), not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation. - MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe fittings. - USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. NPT threads are tapered, and it is recommended to use them together with Pipe Thread Sealant or Teflon Plumbers Tape for sealing. Not recommended to use gaskets. - STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all fittings must be used with sealing tape.

Color: 4P 1/2"Male x 3/4"Female

- 【Product Name】Tee Shape Push-to Connect Fittings - 【Material】Plastic and Copper - 【Size】1/4" Tube OD x 1/8" NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter - 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F - 【Features】√ Freely change pipeline direction after installation √ Easy to insert or pull trachea manually without tools

Size: 1/4"OD x 1/8"FNPT    Number of Items: 10

- 【Model】 2W160-15;Voltage: DC12V - 【Size】 1/2 inch NPT - 【Material】brass - 【Pressure range】0-145Psi【Working temperature range】23-176°F - 【Applicable】Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.)

Size: DC12V    Style: 1/2"

- 【Multi-purpose】The multi-functional balloon pump electric can blow almost all balloons, normal latex balloons, foil balloon, long magic balloon, inflatable pool, swimming ring, air mattresses bed, inflatable boat. Also can be used for vacuuming, such as vacuum bags, etc. - 【Specifications】Dual Independent Motor. Type: manual, automatic. Pressure: 2-10 PSI. Input voltage:110-120V, Power: 20-600W. Noise ≤ 85dB. Frequency: 50/60Hz. - 【Widely Used】5 Nozzles Available. The balloon pump can be used at birthday parties, weddings, baby shower, various commercial activities and other holiday balloon decorations, pool party ,water-fun party, which can help you save time and improve efficiency. - 【Attention】NOT Helium, NOT Hydrogen. This electric balloon pump only fills balloons with air, and the balloons will not float. To extend the life of the electric balloon pump, we suggest you pause after 30 minutes of continuous use. - 【Buy with Confidence】: If you are not satisfied with our electric balloon pump, do not hesitate to contact us, we guarantee to give you 100% satisfied service.

Color: Green

- NPT SPEC/SIZE CHECK: NPT1/8-27 Male x NPT1/4-18 Female Brass Pipe Fitting Adapter, can be used in wet environments. The NPT (National (American) Pipe Thread) size is the American standard 60 degree taper pipe thread, is NOT equal to joint diameter size measured by common tools like ruler, tape measure or vernier caliper. Please find the correct size comparison information on the detailed page before purchasing! - THREADS: 1/8 NPT Male Thread (OD approx 0.39" - 0.4", 27 Threads Per Inch) x 1/4 NPT Female Thread (ID approx 0.47" - 0.5", 18 Threads Per Inch), not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation. - MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe fittings. - USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. NPT threads are tapered, and it is recommended to use them together with Pipe Thread Sealant or Teflon Plumbers Tape for sealing. Not recommended to use gaskets. - STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all fittings must be used with sealing tape.

Color: 1/8" M NPT Thread x 1/4" F NPT Thread

- NPT SPEC/SIZE CHECK: NPT1/1-18 Male x NPT1/4-18 Female Brass Pipe Fitting Adapter, can be used in wet environments. The NPT (National (American) Pipe Thread) size is the American standard 60 degree taper pipe thread, is NOT equal to joint diameter size measured by common tools like ruler, tape measure or vernier caliper. Please find the correct size comparison information on the detailed page before purchasing! - THREADS: 1/4 NPT Male Thread (OD approx 0.52" - 0.54", 18 Threads Per Inch) x 1/4 NPT Female Thread (ID approx 0.47" - 0.5", 18 Threads Per Inch), not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation. - MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe fittings. - USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. NPT threads are tapered, and it is recommended to use them together with Pipe Thread Sealant or Teflon Plumbers Tape for sealing. Not recommended to use gaskets. - STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all fittings must be used with sealing tape.

Color: 2P 1/4"Male x 1/4"Female

- REDUCER FITTING: NPT Brass Pipe Fitting Adapter, for connecting pipes or fittings of different sizes, and can be used in wet environments. The NPT (National (American) Pipe Thread) size is the American standard 60 degree taper pipe thread, which does not represent the internal diameter or outer diameter of the brass joint. The specific ID and OD diameter specifications can be found in the product pictures. Please measure and select the appropriate size before purchasing. - THREADS: 1/8" NPT Male x 1/8" NPT Female threads, not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation. - MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe fittings. - USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. - STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all fittings must be used with sealing tape.

Color: 2P 1/8"Male x 1/8"Female