41101 products in All Categories

Asahipen Oil-based Heavy Duty Paint for Iron Parts, 0.4 gal (1.6 L), Yellow, For Iron, Metal, Rust Resistant, Non-Hazardous, Made in Japan

Color: 2-yellow    Size: 1.6L

- Contents: 23.7 fl oz (0.7 L), Color: Black - Drying time: 1.5 - 2 hours in summer, 5 - 6 hours in winter, Standard coating area (1 coat): 64.6 - 86.1 sqft (6 - 8 sqm or 3.6 - 4.5 tatami mats) - Fire Service Act: Non-hazardous material (designated combustible); Contains flammable and combustible petroleum products - Do not use near open flame, EVA enamel paint (A-052); Ingredients: EVA, pigment, rust inhibitor, organic solvent - GHS Indication: Hazardous, flammable, skin irritant, risk of allergic skin reactions, risk of damage to organs and stimulation of the respiratory system, risk of drowsiness and dizziness, and highly toxic to aquatic organisms

Color: black    Size: 0.7 L

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: black    Size: 1/12L(約83ml)

- Set includes FC6MA3 Circular Saw and 6.5 inches (165 mm) Super Tip Saw

Size: 刃径165mm    Style: Aluminum base    Pattern Name: High-performance chip saw set that can be connected to dust collector

Equipped with professional features. Powerful Motor, 1050 W One-touch lever for cutting adjustment to adjust the cutting depth smoothly. Rear discharge system that discharges the accumulated cutting dust (can be connected to a dust collector). *Note that a duct adapter (Code #333429), sold separately, is needed to connect to a dust collector. Uses a high-steel aluminum base. Adjustable guide piece that can be adjusted to the position of the marker line and the saw blade. Applications: Cutting various types of wood. Cutting various decorative plates, thin resin plates, soft new building materials

Size: 刃径190mm    Style: Aluminum base    Pattern Name: Can be connected to a dust collector

PRODUCT DESCRIPTION We are in the process of changing the name of our brand from “Hitachi Koki” to “HiKOKI.”The brand name of new products will be changed to HiKOKI, but the specifications will not change.Products sold will be a mix of those with the new logo and those with the old one for some time, but we are unable to accept orders that specify the logo. We appreciate your understanding in this regard.Some product listings may feature images with the old logo at the top of the product page.Standard Accessories: Tip Saw (52 Blades), Hex Wrench, Guide AMAZON.COM REVIEW ●日立だけのベース平行度微調整機構 ●一目でわかるカラーコード(黄色)採用 ●材料にやさしい樹脂製保護カバー ●ブレーキ付

PRODUCT DESCRIPTION Uses an aluminum base. HiKOKI's exclusive mechanism for fine adjustment of the parallelism. AMAZON.COM REVIEW ●丈夫なアルミベース採用 ●日立だけのベース平行度微調整機構 ●一目でわかるカラーコード(黄色)採用 ●材料にやさしい樹脂製保護カバー ●ブレーキ付

- Topper Dimensions (Outer Diameter x Thickness x Hole Diameter): 14.0 x 0.1 x 1.0 inches (355 x 3.0 x 25 - Maximum Cutting Capacity: [Pipe] 0° 4.7 inches (120 mm), 45° 4.5 inches (115 mm), [L-shaped steel] 0° 5.1 inches (130 mm), 45° 3.9 inches (100 mm) - Incline Cutting Range: 0° (right angle) - 45° - Rotational Speed: 3,800 rpm - Vice opening: 9.3 inches (235 mm) - Unit Dimensions (W x D x H): 23.2 x 11.8 x 25.2 inches (590 x 300 - Weight: 37.5 lbs (17.0 kg) - Cord: 2 core, 6.6 ft (2 - Standard accessories (main unit mounted): Toshi, hexagonal wrench 0.3 inches (8 mm)

- Field of view size 92x42mm, equipped with 2 high sensitivity sensors - Fast darkening, 1/30,000 second response time Bright/dimmer adjustment function (0.1-0.8 seconds) can be set manually - Ideal for TIG, MIG, MMA and Grinder Tasks. High Definition Natural Color Reproduction Vision - V2 (1/1/1/2) Optical Class - For use with solar powered and replaceable lithium battery (CR2450) Adopt high quality PP material, meet ANSI Z87.1, EN 379, CSA Z94.3, EN ISO 16321 standard - Pivoting headgear for outstanding wearing comfort Lightweight design, total weight 500g

Style: LYG-L600A

Powerful and strong cutting power, condensed function for comfortably cutting various steel materials and steel pipes. Features: Simple model with ease of use. For cutting electrical conduits etc. For cutting channel steel, angle steel, etc. For cutting mild steel round rods, etc. Maximum Cutting Depth: 5.0 inches (127 mm) Double insulated Whetstone diameter: 14.0 inches (355 mm) Maximum Cutting Capacity: 3.5°F (90°C/45°C). Round pipe: 50/50 inches (127/127 mm). Square pipe: 47.9 / 41.7 inches (119 / C-shaped steel: 70 x 233/115 x 103 L-shaped steel: 137/100

- Grinding Wheel Dimension: 100 x 4 x 15 mm (3.9 x 0.2 x 0.6 in.) - Current (A): 5.9 - Rotation speed: 12,000 RPM - Cord: 2 core, 5.9 ft (1.8 m) - Standard accessories: Resinoid grinding wheel (A36Q), spanner

Pattern Name: Standard Model

- Grinding wheel dimensions (outer diameter x thickness x hole diameter): 3.9 x 0.12 x 0.6 inches (100 x 3 x 15 mm) (standard accessories) - Power Supply: Single phase 100 V - Current: 7.4A - Power Consumption: 720 W - Maximum Output: 960 W - No-load rotational speed: 12,000 rpm - Weight: 3.7 lbs (1.7 kg) (excluding cord and grinding wheel) - Cord: 2 core, 8.2 ft (2.5 m) - Standard Accessories: 3.9 inches (100 mm) Resinoid Flexible Grinding Wheel (#36), Spanner, Side Handle

Pattern Name: High Power Model