36089 products in All Categories

No description available.

No description available.

No description available.

No description available.

No description available.

Color: Mushrooms

No description available.

No description available.

- Perfect Compatibility: CryoGrip Pro Frostbite Panda Build Plate is suitable for 3D printers with a platform size of 257x257mm, compatible with Bambu-Lab P1S, P1P, P2S, X1C, X1E, A1. An AR code is included on the build plate to ensure it is recognized by the X1C, eliminating setup errors for a hassle-free printing experience. NOTE: If you are using P2S, please close the build plate printing detection - Low-Temp with No Glue Printing: PLA filament can be printed at indoor temperature and provide ultra strong adhesion, with a temperature range of only 30-50℃, saving heating bed time, Eco-Friendly, 50% Power reduction. It can also be used for PETG filament (50-70℃). Note: ABS and TPU filament are not recommended to be used as they may require the use of a scraper to remove the printed part, which can easily cause damage to its bottom - Unparalleled Adhesion and Zero Heat Generation: CryoGrip Pro Frostbite Panda Build Plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Designed to safely protect your printing at room temperature. Enjoy perfect printing effect without warping - Special Material Texture Printing: CryoGrip Pro frostbite Cold Build Plate sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The base coat and intermediate coating are respectively a highly active adhesion layer and an ice blue ultra-high temperature light cured sintered layer, bring Impact resistant, Corrosion Resistant, Long life span.zero risk of repeated bending causing coating to peel off - Easy to Removable: The printed model can be disassembled without the need for other tools; After bending, the steel plate can return to a flat state. After prolonged use, wiping with clean water can easily restore the new adhesive effect

Style: CryoGrip Pro Frostbite

- Double Sided Textured PEI Printing: The product is flexible spring steel plate with double sided textured PEI coating. The double sided PEI textured surface, presenting the texture sticker surface a distinctive textured touch, provides greater adherence to the model and prints without warping - Compatibility: Our double-sided textured PEI plate fit 3D printers with a platform size of 257x257mm, compatible with Bambu-Lab P1P/P1S/P2S/X1C/X1E/A1. NOTE: If you are using P2S, please close the build plate printing detection - Easy to Stick and Remove: No need for other tools, upgraded magnetic build surface provides the best adhesion. easy to stick and remove prints, just bend it a little and it will pop up immediately, fully eliminate your printing anxiety - Excellent flatness: The Panda build plate has flat construction surface, ensuring high flatness for the bottom of print, to make sure the model can be firmly attached to the surface of the print platform - High-Quality Materials: Panda build plate surface has strong high temperature stability, high printing stability, flame retardant, high temperature resistance, high strength and other properties, flexible and removable, it is not easy to deform, adheres well

Style: Double Sided Textured PEI

- 【 Easy to Print】PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness, not easy to break. low shrinkage, no deformation, no cracking, high printing precision. Made with starch raw materials derived from plant resources, ideal for indoor printing. - 【High Speed Printing】Meet the demands for high-speed printers. Continues consistently outstanding performance at high speeds. Compatible with Bambu Lab X1 / X1C / P1P ,Creality K1 / K1 Max and AnkerMake M5. - 【Tangle Free & No Plugging】Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder. - 【Dimensional Tolerance +/- 0.03mm】eSUN PLA+ 3D printer filaments are produced with more precise specification. Minimum tolerance and low warping to ensure consistent feeding and stable prints, no bubbles, less stringing, extremely high successful rate. - 【High Compatibility】Compatible with Most of FDM 3D Printers, such as:Bambu Lab P1P / X1 / X1C, AnkerMake M5, Creality K1 / K1 Max, Voron 2.4, FLSUN V400, Prusa, UltiMaker, MK3, Ender 3, MakerBot, Flashforge, Raise3D. Good layer bonding performance meets your demands for printing functional parts with higher toughness. Widly used in machinery, electronic appliances, automobiles, decorations, COSPLAY and other items.

Size: 2KG PLA+ (2 Spool)    Color: Yb-black 2 Spools

- Stansport provides everything you need when it comes to camping, hiking, outdoor recreation, emergency prep, survival, and gold discovery - Works On Most Slotted Lids - Constructed Of Durable Steel - Prevents Scalding From Hot Lids - Package Dimensions: 3.2 L x 48.3 H x 16.5 W (centimeters)

Pattern Name: With Lid Lifter    Style: With Legs-2 QT

- DURABLE CAST IRON CONSTRUCTION - Our cast iron dutch oven with lid is made to last. Crafted with high-quality cast iron, this dutch oven can withstand high heat and is perfect for cooking a variety of dishes. - VERSATILE COOKING POT - From stovetop and oven, to the campsite, this cast iron dutch oven has you covered. Use it for braising, roasting, baking, and more. The tight-fitting lid helps retain heat and moisture for delicious meals every time. - LARGE CAPACITY FOR FAMILY MEALS - With a 8-quart capacity, our dutch oven is perfect for cooking large meals for the whole family or hosting dinner parties. The spacious interior allows you to cook multiple dishes at once. - EASY TO CLEAN AND MAINTAIN – Stansport cast iron comes pre-seasoned and ready to use. Wash with warm water after cooking. To maintain long lasting use, after drying, re-season by rubbing a light later of vegetable oil over the entire surface. - TRUSTED BRAND FOR OVER 75 YEARS – We are a family run company with a history of supplying high value camping gear to the full spectrum of outdoor activity shoppers. Since 1949, Stansport has been providing quality, yet affordable camping gear for the everyday camper.

Pattern Name: Dutch Oven    Style: With Legs-8 QT