28164 products in All Categories

Asahipen Oil-based Heavy Duty Paint for Iron Parts, 0.4 gal (1.6 L), Light Green, For Iron, Metal, Rust Resistant, Non-Hazardous, Made in Japan

Color: ライトグリーン    Size: １．６Ｌ

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: ツヤ消しアイボリー    Size: 1.6L

Asahipen Oil-based Heavy Duty Paint for Iron Parts, 23.7 fl oz (0.7 L), Light Gray, For Iron, Metal, Rust Resistant, Non-Hazardous, Made in Japan

Color: gray (light gray)    Size: ０．７Ｌ

Can be painted directly over rust, a rust-preventive paint for iron parts Uses: Topcoat and rust preventative for both indoor and outdoor iron and steel products Features: This is a special rust inhibitor for iron parts that can be applied directly over rust. Has strong adhesion and can be applied to galvalume steel plates, aluminum, stainless steel, etc. Uses silicone acrylic resin for excellent weather resistance No need for rust removal or rust-preventive paint, significantly reducing painting labor Notes: Contains flammable and ignitable petroleum products. Do not use for anything other than the intended purpose. Do not apply near open flames. Do not use if you are in poor health or sensitive to allergens or chemicals. When handling, use a mask, protective glasses, and gloves (such as poly gloves that are resistant to paint) as necessary. Avoid contact with skin, as it may cause irritation. Also, be careful not to inhale vapors or get it in your eyes. *Contains organic solvents, so ensure that there is good ventilation while painting and drying. Paint will not come off clothes once it gets on them. Work in clothing that you won’t mind getting soiled. Avoid painting on days that are likely to rain or on days with high humidity; paint on a good weather day. Finish painting by 3 PM during seasons when condensation occurs. If thinned too much or applied too thinly, sufficient effects may not be obtained. *Coating area and drying time may vary slightly due to variations in color, material, application method and weather conditions. May not adhere to special sidings using fluorine or silicone resins, photocatalysts, caulking materials, or sealing materials. If painted over before it is dry, the paint film may wrinkle and lift. The paint film may dissolve if wiped with paint thinner or solvent-based cleaner after drying. Dispose of the container after using up the paint. If it is necessary to dispose of paint, solidify it with an oil-based paint hardener or spread it on newspapers and dry it completely before disposing of it as general waste. If transferring paint, use a non-soluble container like metal. Handle the container with care to prevent content spillage if dropped. *Please store out of reach of children and prevent them from accidentally ingesting or tampering with the product. Store out of reach of young children and ensure they do not ingest, eat, or tamper with it. Close the lid of the remaining paint tightly and store it, using it up as soon as possible. (1) Remove any peeling old paint films and loose rust thoroughly using a putty knife, wire brush, sandpaper, etc. (Remove dust, dirt, mold from the surface to be painted, dry thoroughly, and wipe off oil and wax with paint thinner). (2) Cover areas that should not be painted with masking tape or a masker in advance. (3) Support the lid with your hand and open it by inserting a screwdriver between the lid and the container, then stir thoroughly from the bottom of the container with a stick to even out (the paint is ready to use without thinning, but if it dries too quickly and is hard to apply, such as in summer, thin it slightly with paint thinner (within 10%). (4) Test paint in an inconspicuous area first to check the color, drying properties, impact on the substrate, and adhesion before painting (paint corners and hard-to-reach areas first with a detail brush, and use a flat brush, roller brush, or wide brush for larger areas to paint quickly and easily). For recoating, wait at least 4 hours (8 hours in winter) before applying the second coat. (5) Remove the masking tape once the paint is no longer tacky to the touch. Wash brushes with paint thinner or brush cleaner before the paint dries (if you scrape the paint off the brush onto newspaper, you will need less thinner). *In case of contact with eyes, immediately flush with plenty of water and seek medical attention as soon as possible. If swallowed by accident, seek medical attention as soon as possible. *In case you feel queasy from inhaled vapors, gas etc, please rest in an area with fresh air and contact a physician when necessary. *In case of contact with skin, wash off with plenty of soapy water, and seek medical attention if you experience pain or if there is a change in appearance.

Color: black    Size: 1/12L(約83ml)

- Can be painted directly over rust, a rust-preventive paint for iron parts - Standard paint coats: 1 coat - Gloss: Matte - Coating finish: Opaque (hides the base) - Capacity: 54.1 fl oz (1.6 L)

Color: matte white    Size: 1.6L

- Due to the special rust inhibitor formulation, it can be applied directly over rust without removing it - Strong adhesion, can be applied to Galvalume steel sheets, aluminum, stainless steel, etc - Utilizes silicone acrylic resin for excellent weather resistance - No need for rust remover or rust-stopping paint, significantly reducing the time required for painting - Applications: (Indoor/Outdoor classification: For both indoor and outdoor use) Doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products, galvalume steel plate sidings, corrugated metal, aluminum building materials, stainless steel products - (Standard) Number of coats: 1 coat - (Standard) Paint coverage area: 1/5L/1.7-2.3㎡ (equivalent to 1-1.4 tatami mats) - Drying time: Summer: 1.5 - 2 hours, Winter: 5 - 6 hours

Color: gray (light gray)    Size: １／５Ｌ

- Integrated wide spherical lens Provides a wide field of view up, down, left, and right The PET-AF lens features a double-sided hard coating and anti-fog treatment, making it resistant to scratches even with heavy use, ensuring a clear and comfortable view Cuts over 99.9% of harmful UV rays (~380nm and below) - The "Scratch Guard" firmly protects the central part of the lens from scratches - The integrated molding of the main frame and cushion provides high impact resistance The parts that touch the skin are made of elastomer material that is soft to the touch - A model equipped as standard with a spring belt that has minimal stretch degradation and a YCP clip that fits well on helmets By attaching a cloth cover to the rust-resistant stainless steel spring, the spring does not interfere directly with the helmet, allowing for smooth raising and lowering of the goggles - The lens can be replaced with a single touch Simply rotate the left and right lock rubbers to unlock, lift up the frame, and easily replace them

Color: Spring Belt

- Integrated wide spherical lens Allows for a wide field of vision, left and right. PET-AF lenses are hard-coated on both sides and anti-fog treatment, so they are scratch resistant even after hard use and ensure a comfortable vision. Blocks over 99.9% of harmful UV rays (~380nm) - The "Scratch Guard" securely guards against scratches in the middle of the lens - The integrated structure of the frame and cushion demonstrates high impact performance. The parts that touch the skin are made of elastomer material that is soft to the touch - Back closure buckle type for easy wearing - The lens can be replaced with a single touch. Simply unlock the left and right locking rubber and pull up the frame for easy replacement

Color: Buckle belt

- Field of view size 92x42mm, equipped with 2 high sensitivity sensors - High-speed darkening, response time 1/30000 seconds Bright/dimmer adjustment function (0.1-0.8 seconds) can be set manually - Ideal for TIG, MIG, MMA and Grinder Tasks High-definition, natural color reproduction view - V2 (1/1/1/2) optical class - Utilizes solar power and a replaceable lithium battery (CR2450) Adopts high-quality PP material, compliant with ANSI Z87.1, EN 379, CSA Z94.3, EN ISO 16321 standards - Pivoting headgear for outstanding wearing comfort Lightweight design, total weight 500g

Style: LYG-L600A

- Due to the special rust inhibitor formulation, it can be applied directly over rust without removing it - Strong adhesion, can be applied to materials such as Galvalume steel sheets, aluminum, and stainless steel - Utilizes silicone acrylic resin for excellent weather resistance - No rust remover or rust-stopping paint is required, significantly reducing the time needed for painting - Applications: (Indoor/Outdoor classification: For both indoor and outdoor use) Doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products, galvalume steel plate sidings, corrugated metal, aluminum building materials, stainless steel products - (Standard) Number of coats: 1 coat - Standard coverage area: 1.6 L / 6 to 8 m² (3.6 to 4.5 tatami mats) - Drying time: Summer: 1.5 - 2 hours, Winter: 5 - 6 hours

Color: Blue    Size: 1.6 L

- Due to the special rust inhibitor formulation, it can be applied directly over rust without removing it - Strong adhesion, can be applied to materials such as Galvalume steel sheets, aluminum, and stainless steel - Utilizes silicone acrylic resin for excellent weather resistance - No rust remover or rust-stopping paint is required, significantly reducing the time needed for painting - Applications: (Indoor/Outdoor classification: For both indoor and outdoor use) Doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products, galvalume steel plate sidings, corrugated metal, aluminum building materials, stainless steel products - (Standard) Number of coats: 1 coat - Coverage area (standard): 6.76 fl oz (1/5L) / 18.3 - 24.3 sqft (1.7 - 2.3 sqm) (1 - 1.4 tatami mats) - Drying time: Summer: 1.5 - 2 hours, Winter: 5 - 6 hours

Color: アイボリー    Size: １／５Ｌ

- Thanks to the special rust inhibitor formulation, it can be applied directly over rust without removing it - Strong adhesion, suitable for use on Galvalume steel sheets, aluminum, stainless steel, etc - Utilizes silicone acrylic resin for excellent weather resistance - No need for rust remover or rust-stopping paint, significantly reducing the time required for painting - Applications: (Indoor/Outdoor classification: For both indoor and outdoor use) Doors, fences, shutters, pipes, machinery, agricultural equipment, and other indoor and outdoor iron parts and iron products, galvalume steel plate sidings, corrugated metal, aluminum building materials, stainless steel products - (Standard) Number of coats: 1 coat - (Standard) Paint coverage area: 1/5L/1.7-2.3㎡ (1-1.4 tatami mats) - Drying time: Summer: 1.5 - 2 hours, Winter: 5 - 6 hours

Color: ツヤ消し黒    Size: １／５Ｌ